Overview
The Dana Spicer 5-1350X is a heavy-duty 1350 series U-joint with a forged cross, an outside snap ring and an OEM replacement design. Its cup size is 1.188in and its outside to outside measurement is 3.625in.
Confirm the joint’s design before greasing it, since its lubeable status needs to be settled first.
Key features
- Heavy-duty 1350 series design
- Forged cross
- OEM replacement
- Outside snap ring
- Cup size 1.188in and outside to outside 3.625in
Heavy-duty joints and driveline loads
Heavy-duty U-joints carry higher torque and angle loads than light-duty joints, so the cross and cups take more stress over time. A forged cross and an outside snap ring help the joint hold together under those loads. The joint should be checked for play after the first drives and at regular service intervals, especially if the vehicle tows or runs rough trails.
Lubrication is the first thing to resolve on this joint. Until the design is confirmed, do not apply grease, since the wrong service can wash out the seals or leave the joint dry. Once the design is clear, grease it as required, and compare the cup and outside to outside size with the old joint before fitting.
- Confirm the lubeable design before greasing
- Check the cross for play after the first drives
- Replace the joint if the cups show heat or rust streaks
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 5-1350X |
| UPC | 23913121150 |
| Series | 1350 |
| Cup size | 1.188in |
| Outside to outside | 3.625in |
| Lubeable | Listed both ways, see overview |
| Cross | Forged |
| Snap ring | Outside |
Vehicle fitment
No vehicles are named for this joint. It is labeled universal fit, so match the 1350 series and the 1.188in cup size to your existing joint.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lubeable details conflict, hold off on greasing until the design is confirmed.
What’s included
One 1350 series U-joint.
Not included: the yokes, shafts and any grease.









