Overview
The Dana Spicer 5-648X is a forged, lubeable crossover U-joint that joins a 1330 series yoke to a 1350 series yoke. It uses outside snap rings, a cup size A of 1.062in, a cup size B of 1.188in, and a 3.625in outside to outside measurement on both sides.
It is a universal fit crossover, so the yoke at each end decides whether it suits a driveline. Confirm each end’s yoke series before a driveline is assembled around it.
Key features
- Crossover for 1330 to 1350 series yokes
- Forged cross
- Lubeable design
- Outside snap rings
- Cup size A of 1.062in
- Cup size B of 1.188in
- Outside to outside 3.625in on both sides
Before you buy
A crossover joint is used where two yoke styles meet, so it must match one series at each end. Its two cups are sized to their own yokes, which means the side nearest each yoke matters. Before ordering, mark the driveshaft ends and measure each yoke separately, then compare those figures with the cup sizes and outside to outside distances for each side.
Because the crossover is a single joint with a cross, wear at either cup usually means replacing the whole part. Check each cup for play, look for grease that has leaked out, and feel for movement when the shaft is turned. Crossovers in driveshafts with other joints often wear together, so inspect the rest of the shaft while it is out and replace any joint showing play at the same time.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 5-648X |
| UPC | 23913126353 |
| Type | Crossover, 1330 to 1350 |
| Construction | Forged cross |
| Lubeable | Yes |
| Snap ring style | Outside |
| Cup size A | 1.062in |
| Cup size B | 1.188in |
| Outside to outside A | 3.625in |
| Outside to outside B | 3.625in |
| Fit | Universal fit crossover |
Vehicle fitment
No vehicle, year or model is named for this crossover. Its fitment depends on the 1330 and 1350 yoke ends in the driveline, not on a model name.
Crossovers for other series pairs are separate parts. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the yoke on each end first, because the two cup sizes differ. Grease the lubeable joint after installation, and recheck driveline angles once the shaft is reinstalled.
What’s included
The joint is a single crossover. Check the package contents against your installation before starting.









