Overview
The ARB U-Bolt, part number OMEU61B, is a rear axle U-bolt with washer and nut, for the 1986-1993 Suzuki Samurai.
These are heavy duty U-bolts that keep the axle in place. A U-bolt clamps the axle to the leaf spring, and the kit comes with a washer and nut for installation.
Key features
- Heavy duty U-bolt from ARB
- Rear position
- Washer and nut included
- Direct fit for the listed Suzuki Samurai trims
Inspecting axle clamp hardware
Axle clamp hardware sees constant load from road shock, braking torque and axle movement. Over time the threads can stretch, the spring plate can shift and the clamp can loosen, which may allow the axle to move on the spring. Inspect the hardware whenever tires are removed and during regular underbody checks, looking for rust, cracks and elongated holes.
When replacing U-bolts on an older Samurai, check the spring pack and axle housing for wear before reusing any mounting parts. Corroded spring plates or worn perches can hold a new U-bolt loosely, so clean the contact surfaces and replace parts that are pitted or deformed. Clean threads and contact surfaces before reassembly help the clamp load stay consistent.
- Check for rust and cracks around the clamp
- Replace stretched or damaged nuts
- Confirm the axle sits centered on the spring
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | ARBOMEU61B (OMEU61B) |
| UPC | 70000623168 |
| Product type | U-bolt |
| Position | Rear |
| Included hardware | Washer and nut |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the OMEU61B covers: 1986–1993 Suzuki Samurai (Base, JA, JL, JS, JX, JX SE).
The U-bolt fits the 1986-1993 Suzuki Samurai, and other Suzuki models are outside this fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
U-bolts are safety-critical, so professional installation is recommended. Support the vehicle on rated jack stands, never on a jack alone. Follow the installation steps for your vehicle and tighten all fasteners to the specified torque. Re-check fasteners after the first miles of driving and again after off-road use. Have the alignment checked after any suspension or steering work, and check that brake lines, hoses and wiring have full clearance through suspension travel.
A U-bolt clamps the axle to its spring pack, so it is a safety-critical fastener. Replace U-bolts as a matched set on one axle rather than mixing old and new, and never reuse stretched or damaged hardware. Tighten the nuts evenly in a cross pattern to the specified torque with the vehicle’s weight on the suspension. Re-check the torque after the first miles and again after off-road use, because spring packs settle and clamp load can drop. If replacing a U-bolt because it broke or loosened, also inspect the spring plate, spring center bolts and axle perches for damage or wear.
What’s included
The U-bolt comes with a washer and nut.
Not included: Spring plates and other axle hardware may be needed, so check what your installation requires before starting.




