Overview
The Pro Comp 13-90180A is a round U-bolt with a 5/8 in -18 thread. It measures 3.5 in by 15.75 in and carries a clear zinc plated finish.
Packaged with hardware, it is a U-bolt for spring and axle mounting. The diameter and length are the points to match.
Key features
- Round profile
- 5/8 in -18 thread
- Clear zinc plating
- Packaged with hardware
Thread, length and clamp load
The thread and length of a round U-bolt determine how it sits through the plate and how much clamp load the nuts can deliver. Longer legs need more room at the spring, and a thread that does not match the nut will strip under torque. Measure the existing U-bolt before removal so the replacement lines up.
Clamps tend to loosen when the axle moves over rough ground or when nuts were never fully torqued. Check tightness after the first few trips, and look for elongated holes or a slipping plate. Zinc finish helps against corrosion, but it does not change how the clamp holds. Keep spare nuts with the clamp kit in case one fails on the trail.
- Match the nut to the thread size
- Check for elongated plate holes
- Keep spare nuts in the kit
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13-90180A |
| UPC | 614901130621 |
| Profile | Round |
| Thread | 5/8 in -18 |
| Size | 3.5 in by 15.75 in |
| Finish | Clear zinc plated |
| Hardware | Included |
Vehicle fitment
Measure the axle diameter and spring setup, then confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One packaged round U-bolt with hardware, part number 13-90180A.







