Overview
The Pro Comp 13-90356A is a square, plain U-bolt with a 9/16 in -18 thread. It is packaged with its hardware and measures 3 1/8 in by 9.25 in.
Key features
- Square profile
- 9/16 in -18 thread
- Plain finish
- Packaged with hardware
Sizing a U-bolt correctly
A U-bolt clamps an axle to a leaf spring, so its thread, bend width and length decide whether it wraps the axle tube and seats squarely on the spring pack. Before installing, measure the axle tube diameter and the spring thickness on your own vehicle and compare them with the dimensions shown above. A square profile grips flat spring seats well, while a width mismatch can leave the nut pulled to one side.
Nuts on U-bolts are commonly replaced along with the bolts, especially after a lift or axle swap, because threads stretch under load. Check the threads for rust, flat spots or cross-threading, and retorque the nuts after the first few drives. Look for cracks or bent legs, which mean the bolt should be replaced rather than reused.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13-90356A |
| UPC | 614901131055 |
| Profile | Square |
| Thread | 9/16 in -18 |
| Size | 3 1/8 in x 9.25 in |
| Finish | Plain |
| Hardware | Included |
Vehicle fitment
It is not built for one vehicle model. Confirm fit for your vehicle’s year, model and trim before ordering, and compare its 3 1/8 in by 9.25 in dimensions with your axle and spring.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One packaged square U-bolt with hardware, part number 13-90356A.





