Overview
The Pro Comp Suspension 13-90360A is a square axle U-bolt measuring 9/16 in. -18 x 2 5/8 in. x 13 in., with a plain finish, packaged with hardware. A U-bolt is a U-shaped bolt that clamps a leaf spring or similar part to an axle.
Measuring for a U-bolt
A U-bolt is only as good as the fit between the bolt, the spring or axle plate, and the axle tube. Before ordering, measure the axle diameter, the spring thickness, and the distance the bolt must reach to clear the plate and nuts. Getting these measurements right avoids a bolt that is too short to engage the nut fully or one that bottoms out on the axle.
Thread condition matters too. Clean the threads, check for rust or stretching, and replace any bolt that shows damage. Use new nuts when the old ones are worn, and recheck the torque after the first few drives, since the clamp settles as the spring seats.
- Measure the axle tube diameter before ordering
- Check the spring thickness and plate fit
- Clean and inspect threads before assembly
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13-90360A |
| UPC | 614901130935 |
| Product type | Axle U-bolt (square) |
| Size | 9/16 in. -18 x 2 5/8 in. x 13 in. |
| Finish | Plain |
| Hardware | Included |
Vehicle fitment
Fit depends on the axle and spring dimensions, so measure those against the 9/16 in. -18 x 2 5/8 in. x 13 in. size before ordering.
Installation notes
U-bolts hold the axle to the springs, so professional installation is recommended. Use the included hardware, torque to specification, and re-check tightness after the first miles of driving.
What’s included
- U-bolt, packaged with hardware








