Overview
The TM3407-20010 is a three-quarter-inch front leveling lift sold as a pair, built with front coil spring spacers. The rear lift method is front only, so the rear keeps its factory height. It fits Jeep Wrangler LJ and TJ models.
The spacers are polyurethane with a black finish. Trail Master describes installation as easy, and the kit carries its lifetime warranty. There are no bump stops, no shock relocation bracket and no track bar drop with this kit.
Key features
- three-quarter-inch front lift
- Sold as a pair
- Front coil spring spacers
- Polyurethane spacer material
- Black finish
- Front lift only
- Lifetime warranty
Setting up a pair
Buying a pair means both front springs receive the same spacer, which keeps the truck level side to side. Before installing, check that both springs are in similar condition, since a weak spring on one side can leave the stance uneven even with matched spacers. Clean the spring seats and inspect the spacers for any defect in the material before fitting them. Keep the hardware together by side so nothing is mixed up during the install.
Polyurethane spacers still need regular inspection. Look for cracks, flattening or squeeze marks whenever the truck is serviced, and recheck the front height after a season of use. A lift this small is easiest to judge against the tire and fender clearance already in place, so measure those before installing.
- Match both springs before installing
- Inspect spacers for cracks each season
- Check tire rub at full steering lock
- Recheck front height after the first season
Specifications
| Brand | Trail Master |
|---|---|
| Part number | TM3407-20010 |
| UPC | 614901082333 |
| Lift height | three-quarter inch |
| Front lift method | Coil spring spacers |
| Rear lift method | Front lift only |
| Sold as | A pair |
| Bump stops | None |
| Track bar drop | Not included |
| Spacer material | Polyurethane |
| Finish | Black |
Vehicle fitment
It fits the 2004 to 2006 Jeep Wrangler LJ, including the Unlimited and Unlimited Rubicon, and the 1997 to 2006 Jeep Wrangler TJ, including the Rubicon, Sahara, Sport and SE trims. The YJ, JK and JL Wrangler are outside this fit. Check your year, model and trim before ordering.
The list does not include the YJ, JK or JL Wrangler, or any other Jeep model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The coil spring spacers go on the front springs, and because the lift is only three-quarter inch, the change is mainly to front height. Check the alignment once the spacers are in place.
Because the kit is sold as a pair, one spacer goes on each front spring. The three-quarter-inch lift is small, so the change in front height is modest, and an alignment check is still recommended.
What’s included
A pair of front coil spring spacers in polyurethane and black.
Not included: a track bar drop.









