Overview
The TM108 is a 2.5-inch leveling lift kit that raises the front of the vehicle with torsion keys. The lift is front only, so the rear keeps its factory height. The kit includes everything needed to raise the vehicle, and it is covered by a lifetime warranty.
Torsion keys set the adjustable front height. The kit includes a shock relocation bracket, a hardware kit and a gray steel spacer. It comes with no bump stops and no track bar drop. The design aims to limit wear on factory ball joints and steering components while keeping noise and vibration down.
Key features
- 2.5-inch front lift using torsion keys
- Front lift only; the rear keeps its factory height
- Shock relocation bracket included
- Hardware kit included
- Steel spacer in a gray finish
- No bump stops and no track bar drop
- Covered by Trail Master’s lifetime warranty
Before you buy
A leveling kit changes how the front and rear sit relative to each other, so the choice starts with how much height the front needs. Torsion keys allow the front to be adjusted, which makes it easier to set the height by measurement after the kit is in. Measure the current front and rear heights before ordering so the change can be judged against a known starting point.
Front lift kits often affect shock length, brake hose reach and steering geometry, so check those parts during installation. Worn ball joints and tie rod ends should be inspected before the lift goes on, since added front height puts extra angle on them. Re-torque the hardware after the first few drives and recheck alignment once the vehicle has settled.
- Measure front and rear heights before installation
- Inspect ball joints and tie rod ends
- Check brake hose length after the lift
- Recheck alignment after the first drives
Specifications
| Brand | Trail Master |
|---|---|
| Part number | TM108 |
| UPC | 614901093094 |
| Front lift height | 2.5 inches |
| Front lift method | Torsion keys |
| Rear lift method | Front lift only |
| Shock relocation bracket | Included |
| Bump stops | None |
| Track bar drop | Not included |
| Spacer material | Steel |
| Finish | Gray |
Vehicle fitment
Before ordering, confirm the year, make, model and trim fit a 2.5-inch front torsion key lift.
Installation notes
Torsion keys set the front height, so the lift is adjusted at the keys rather than with spacers. The included shock relocation bracket provides the shock mounting point for the raised front. A 2.5-inch front lift changes alignment, so have the alignment checked once the kit is in.
What’s included
Torsion keys, a hardware kit, a shock relocation bracket and the steel spacer in gray.
Not included: a track bar drop.












