Overview
The Trail Master 2 Inch Leveling Lift Kit, part number TM490, is a front strut spacer kit that lifts the front of the Ford F-150 by 2 inches. It fits 2004–2018 F-150 models in the FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, 60th Anniversary Edition, XL and XLT trims, in 2WD and 4WD.
The kit uses steel spacers in a black finish. It does not include a shock relocation bracket or a track bar drop.
A front strut spacer lift raises the truck by placing a spacer between the strut and its mount, so the factory strut and coil remain in place. This keeps the setup simple, but the rear stays at its original height, which changes the front-to-rear balance. Check the level of the truck after installation and confirm that the tire fitment clears at the new height.
The kit has no bump stops, so the suspension has no added protection at full compression. Check the bump stop setup before using the truck off-road. Without a track bar drop, check the track bar geometry if you raise the front significantly.
Key features
- 2 inch front lift
- Front strut spacers
- Steel spacers in black
- Suits 2WD and 4WD models
Leveling a Ford F-150
A front spacer kit is a common way to level an F-150 whose rear sits higher than the front, but the rear stays at its original height. Measure the front and rear heights on level ground, and record them before and after fitting so any change is clear.
Bump stops and shock length matter when the front rises. Without stops, the suspension has less protection at full compression, so inspect the bump stops and the shock travel before any off-road use. Check the shocks for enough extension at the new height.
Tire clearance is the other common concern. Check the tire rub at full steering lock and at full compression, and make sure the brake lines and wiring have enough slack. Recheck the bolts after the first few drives.
Specifications
| Brand | Trail Master |
|---|---|
| Part number | TM490 |
| Front lift height | 2 inch |
| Front lift method | Strut spacers |
| Spacer material | Steel |
| Finish | Black |
| Bump stops | None |
| Track bar drop | Not included |
| Shock relocation bracket | Not applicable |
Vehicle fitment
It fits the 2004–2018 Ford F-150 in 2WD and 4WD models.
F-150 years outside 2004–2018 and other Ford models are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Steel front strut spacers in black. The kit has no bump stops and no track bar drop.













