Overview
The TM402 is a 2.5-inch front leveling lift built around a front strut spacer per side. The lift is front only, and the rear keeps its factory height. Its job is to bring the front of the vehicle up to the rear.
The spacer is steel with a black finish. The kit has no bump stops and no shock relocation bracket, and a track bar drop is not included. Trail Master backs the kit with a lifetime warranty that applies to its full line of leveling kits.
Key features
- 2.5-inch front lift
- One front strut spacer per side in the kit
- Front lift only
- Steel with a black finish
- No bump stops and no track bar drop
- Lifetime warranty
Front-only leveling basics
A front-only leveling kit makes most sense when the rear already sits at the height you want and the front has dropped. Before buying, look at how the front and rear compare at the wheel wells, since a leveling change will only close the gap at the front. If the rear sags under load, a spacer up front will not correct that part of the stance.
Strut spacers also work at the top of the strut, so the upper mount, bump stop and shock travel are all affected. Ask whether the existing shocks have enough travel for the new height, and check the sway bar links for stretch after installation. Taking the time to look at the mount hardware before reassembly makes the job easier to inspect later.
- Measure front and rear height at the wheel wells
- Check shock travel at the new height
- Inspect sway bar links after installation
- Recheck alignment once the front is set
Specifications
| Brand | Trail Master |
|---|---|
| Part number | TM402 |
| UPC | 614901092844 |
| Front lift height | 2.5 inches |
| Front lift method | Strut spacers |
| Rear lift method | Front lift only |
| Shock relocation bracket | Not applicable |
| Bump stops | None |
| Track bar drop | Not included |
| Spacer material | Steel |
| Finish | Black |
Vehicle fitment
Fit depends on your truck’s year, make, model and trim. Match those details to a 2.5-inch front strut spacer before buying.
Installation notes
A strut spacer sits between the strut and its mount, so the lift is made at the front end only. Recheck the alignment after the spacers are installed, since the front height has changed.
The strut spacer is a single front part, so it suits owners who want a modest front-only change without touching the rear suspension.
What’s included
The front strut spacer for a 2.5-inch lift.
Not included: a track bar drop.









