Overview
The Trail Master TM3317-40010 is a 1.75-inch leveling lift that uses coil spring spacers at both the front and the rear. It includes shock relocation brackets, and the polyurethane spacers are black. It fits the 2007 to 2018 Jeep Wrangler JK, including the Unlimited, Rubicon and Sahara trims.
The front and rear lift both come from coil spring spacers, so this is a two-end lift rather than a front-only leveling kit. The track bar drop is not included, and the kit has no bump stops. A lifetime warranty covers the kit.
Key features
- 1.75-inch lift at the front and rear
- Front and rear coil spring spacers
- Shock relocation brackets
- Polyurethane spacers in black
- Fits the Wrangler JK
- Lifetime warranty
Shock relocation and travel
Raising both ends with coil spring spacers keeps the body level, but the shocks must still reach through their full range. The brackets that come with the kit move the shock mounts so the shocks keep their travel after the lift. Check the mounts for clearance against the frame and brake lines once everything is in place.
Because there are no bump stops with this kit, the suspension can bottom out harder on rough trail. Inspect the shock bodies and mounts for wear after the first outings. A two-end lift also changes driveline angles, so U-joints and the driveshaft are worth a look during the install.
- Shock mount clearance checked at full travel
- Driveline angles and U-joints inspected
- Track bar length confirmed after the change
Specifications
| Brand | Trail Master |
|---|---|
| Part number | TM3317-40010 |
| UPC | 614901081947 |
| Lift height | 1.75 inches |
| Front lift method | Coil spring spacers |
| Rear lift method | Coil spring spacers |
| Shock relocation brackets | Included |
| Bump stops | None |
| Track bar drop | Not included |
| Spacer material | Polyurethane |
| Finish | Black |
Vehicle fitment
It fits the 2007 to 2018 Jeep Wrangler (JK), including the Unlimited, Rubicon, Sahara and Sport trims and their anniversary editions.
The list covers only the JK, so Wrangler JL and TJ models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Coil spring spacers raise the vehicle at the springs, and the shock relocation brackets move the shock mounts so the shocks keep their travel after the lift. A 1.75-inch lift changes alignment, so have it checked afterward.
The rear coil spring spacers raise the rear to match the front, so the kit works as a front and rear set.
What’s included
Front and rear coil spring spacers, shock relocation brackets, and polyurethane spacers in black.
Not included: a track bar drop.









