Overview
The Trail Master TM3307-40010 is a three-quarter-inch leveling lift for the front of the vehicle, built with front coil spring spacers. It is the smallest lift in Trail Master’s leveling range, and it lifts the front only. The rear keeps its factory height.
The spacers are polyurethane in a black finish. Trail Master lists easy installation for the kit, and the lifetime warranty applies. The kit has no bump stops, no shock relocation bracket and no track bar drop.
Key features
- three-quarter-inch front lift
- Front coil spring spacers
- Polyurethane spacer material
- Black finish
- Front lift only
- Straightforward installation
- Lifetime warranty
What a small lift does
A three-quarter-inch change is mostly about correcting a front that sits low compared with the rear. Because the spacer sits on the spring seat rather than on the strut, the shock and bump stop arrangement stays as it was. That keeps the work simple, but it also means the lift is limited to the height the spacer provides, and it will not add real tire clearance on its own.
Polyurethane is a firm, durable material, but it should be inspected for cracks or compression after a season of use, especially where road salt and grit collect. Check the front springs for sag, since a spring that has weakened will not respond to a spacer the way a healthy spring does. An alignment check after the spacers go in is still a good habit even at this small height.
- Inspect spacers for cracks each season
- Check front spring condition before installing
- Confirm the alignment after the install
- Leave shocks and bump stops as they are
Specifications
| Brand | Trail Master |
|---|---|
| Part number | TM3307-40010 |
| UPC | 614901081978 |
| Front lift height | three-quarter inch |
| Front lift method | Coil spring spacers |
| Rear lift method | Front lift only |
| Shock relocation bracket | Not applicable |
| Bump stops | None |
| Track bar drop | Not included |
| Spacer material | Polyurethane |
| Finish | Black |
Vehicle fitment
Because the lift is small, check that it suits your truck’s year, make, model and trim before ordering, along with its current front height.
Installation notes
Coil spring spacers fit on the front springs, and a change this small is mostly about correcting front height rather than adding clearance. The alignment should still be checked after the spacers go in.
A lift this small mainly corrects a front height that sits low, and it leaves the rear at its factory height. Coil spring spacers work at the spring seat, so they add height without changing the strut geometry.
The kit has no shock relocation bracket and no bump stops, so the shock and bump stop arrangement is unchanged.
What’s included
Front coil spring spacers in polyurethane and black.
Not included: a track bar drop.









