Overview
The TM503 is a front leveling lift that raises the front 2.5 inches with strut spacers. It is a front lift only, and the rear stays at factory height. The maximum tire size is 33×12.50.
The spacers are aluminum with a black finish, designed to limit added load on factory ball joints and steering parts. The shock relocation bracket does not apply to this kit, and no track bar drop is included.
Key features
- 2.5-inch front lift
- Front strut spacers
- Front lift only
- Aluminum spacers in black finish
- Easy installation.
- Maximum tire size 33×12.50
- No bump stops or track bar drop
- Lifetime warranty
Choosing a lift height
Choosing a front lift height is a balance between the stance you want and the parts it affects. A taller front adds clearance for larger tires but can also raise the center of gravity and change how the truck tracks at speed. Before choosing, look at the tire diameter, wheel offset and the space behind the fender, since those are where rubbing most often starts.
Front spacers also change caster and camber slightly, so an alignment after the install is a normal step. On a truck that sees steady highway use, a modest front lift is often easier to live with than a large one. Keep the old hardware on hand for comparison, and inspect the strut tops after the first few drives to confirm nothing has loosened.
- Measure fender clearance at full turn
- Compare tire diameter with the 33×12.50 maximum
- Plan an alignment after the install
- Check brake hose length at the new height
Specifications
| Brand | Trail Master |
|---|---|
| Part number | TM503 |
| UPC | 614901097351 |
| Front lift height | 2.5 inches |
| Front lift method | Strut spacers |
| Rear lift method | Front lift only |
| Shock relocation bracket | Not applicable |
| Bump stops | None |
| Track bar drop | Not included |
| Spacer material | Aluminum |
| Finish | Black |
| Maximum tire size | 33×12.50 |
Vehicle fitment
Match the 2.5-inch front lift to the year, make, model and trim of the truck it will go on before buying the TM503.
Installation notes
The strut spacers mount at the front, so the work stays at the front end. Recheck the alignment once the spacers are in place.
The strut spacers sit at the top of the strut, so the work stays at the front end. The listed contents are the spacers alone, with no shocks, springs or control arms.
What’s included
Front strut spacers.
Not included: a track bar drop.









