Overview
The TM106 is a 2.5-inch front leveling lift that uses torsion keys to raise the front of the vehicle. The rear is not lifted. The maximum tire size is 33×12.50.
The kit is steel with a gray finish and includes a hardware kit with the torsion keys. No bump stops are included, and a track bar drop is not included.
Key features
- 2.5-inch front lift using torsion keys
- Front lift only
- Maximum tire size 33×12.50
- Hardware kit included
- Gray steel spacers
- Track bar drop not included
- Lifetime warranty
Before you buy
A front leveling kit changes only the front of the truck, so the rear suspension stays where it was. That can be the right result when a truck sits low at the front, but it also means the rear may look higher than the front after the install. Think about how far you want the front to rise and whether your current rear height will still look balanced. Torsion keys adjust the front height at the torsion bar, so the ride height can be set with care during installation.
Tire clearance and steering geometry are the next things to check. A taller front end often needs a closer look at brake lines, steering stops and the fender edges once larger tires are mounted. Keep a record of the wheel offset and tire diameter you plan to use, because those numbers decide whether the setup fits without rubbing.
- Check the tire diameter against the 33×12.50 maximum
- Recheck the alignment after the torsion keys are set
- Inspect brake lines for stretch after a height change
Specifications
| Brand | Trail Master |
|---|---|
| Part number | TM106 |
| UPC | 614901093070 |
| Front lift height | 2.5 inches |
| Front lift method | Torsion keys |
| Rear lift method | Front lift only |
| Maximum tire size | 33×12.50 |
| Shock relocation bracket | Not applicable |
| Bump stops | None |
| Track bar drop | Not included |
| Spacer material | Steel |
| Finish | Gray |
Vehicle fitment
Because the lift is small, check that it suits your truck’s year, make, model and trim before ordering, along with its current front height.
Installation notes
The lift height is set through the torsion keys, and the 33×12.50 limit should be checked against the wheels you plan to run. The lift changes front alignment, so an alignment check after installation is part of the job.
Tire clearance is the main limit on a kit like this, so measure the wheel and tire combination against the 33×12.50 maximum before choosing the TM106.
What’s included
Torsion keys and a hardware kit.
Not included: a track bar drop.









