Overview
The Fabtech FTS738 is a U-bolt kit that holds an axle against its springs. Fabtech packages the hardware as a single set and marks it universal fit, so the kit is not tied to any named truck or year.
Its UPC is 674866015548, which can be used to confirm the exact kit when comparing parts.
Key features
- Four U-bolts for axle mounting
- Eight Nylock tall nuts
- Eight thick flat washers
- Supplied as one kit
Things to check
Before installing a U-bolt kit, confirm that the axle housing and spring pack have the same geometry the clamp was designed around. The saddle must sit flat, the U-bolts must reach the mounting plate fully, and the nuts must have enough thread engagement to hold under load. A kit that fits loosely on the bench can still fail on the trail if the clamp does not seat evenly.
Consider the condition of the surrounding parts. Worn spring pads, cracked hangers and rusty perches can all change how the clamp loads the axle. Replacing those parts during the same job often costs less than repeating the install later.
- Axle housing condition
- Spring pack seating
- Mounting plate fit
- Spring pad and hanger wear
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS738 |
| UPC | 674866015548 |
| Included hardware | Four U-bolts with eight Nylock tall nuts and eight thick flat washers |
Vehicle fitment
This kit is universal fit and is not sized for one vehicle. Axle width, spring pack and frame mounting all need checking on your truck before you install it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Four U-bolts with eight Nylock tall nuts and eight thick flat washers.







