Overview
The RockJock 4×4 CE-9112B is a threaded bung with jam nut that works as a double adjuster tube adapter for link suspension and steering builds. It allows the link to be adjusted without removal and is universal fit.
The adapter is designed to remove the need for the jam nuts normally used on these links. Because the geometry can be fine-tuned at the adapter, builders can set suspension and steering alignment after the link is in place. A sealed design keeps water and debris out of the link, and a drain hole clears any moisture that reaches the threads.
Key features
- Double adjuster lets the suspension or steering link be adjusted without removal
- Loosen the pinch bolt and turn the adjuster sleeve to fine-tune geometry
- Tube adapter seals the link off from water and other debris
- Integrated drain hole lets water that enters the adapter threads drain out
- Designed to eliminate the jam nuts normally used in link suspension and steering systems
Setting link geometry
Suspension and steering links are often set by feel, but adjustable adapters make the process more repeatable. A double adjuster lets the length be changed while the link stays on the vehicle, so caster, toe or pinion angle can be tuned in small steps. Mark the starting position before adjusting so the change is easy to undo.
After each adjustment, check that the link threads are fully engaged and that the pinch bolt is tight. Recheck the geometry after a test drive, because loads and joints can settle over the first few miles. Adjust in small steps and recheck until the result is what the build needs.
- Mark the starting length before turning the sleeve
- Check thread engagement after every adjustment
- Recheck geometry after the first test drive
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-9112B |
| Product type | Threaded bung with jam nut, double adjuster tube adapter |
| Fitment | Universal fit |
Vehicle fitment
This is a universal fit adapter rather than a vehicle-specific part. It is used on link suspension and steering systems, so match the thread and link size to your own build before installing.
Check fit against your vehicle’s year, model and trim before ordering. Match the thread and link size to your own build before installing.
What’s included
It comes as a threaded bung with jam nut. Check the package contents against your installation before starting.








