Overview
The Blue Torch Fabworks BTF07003 is a 3/4 – 16 right hand thread link insert, a fabrication part that accepts a threaded rod end and is welded into the end of a steel tube. Its part number is BTFBTF07003. It is made for builders who make their own threaded tube links. It is a universal fit part, not tied to a specific make, model or year.
The insert is CNC machined on a turning center from cold roll steel. Its weld surface is machined to a 45 degree angle. Cross drilling the end of the tube adds more weld area. It is designed for 1-1/2 od x 1/4 wall DOM tubing, which gives a 1 inch inside diameter, and the minimum tube ID is 1 inch. Right hand thread only; left hand inserts are sold as separate items.
Key features
- CNC machined from cold roll steel on a turning center
- Weld surface machined to a 45 degree angle
- Designed for 3/4 – 16 thread rod ends
- Fits 1-1/2 od x 1/4 wall DOM tube with a 1 inch inside diameter
- Right hand thread only; left hand inserts are available separately
- Cross drilling the tube end is recommended to add weld area
Choosing rod ends and tubing
A link insert is only as strong as the weld that holds it in the tube, so the tube choice matters as much as the thread. Pick a tube whose inside diameter matches the insert’s design, and confirm the wall thickness suits the loads the link will carry. Thin tube walls heat quickly and can burn through during welding, so a steady setup matters.
Rod ends and jam nuts are often replaced together with the insert, especially on links built for higher-stress use. Check that the rod end thread engages fully through the insert and that the jam nut seats square. After the first trail outings, inspect the weld for cracks, discoloration or movement, and retighten the jam nut if it has loosened.
- Match thread direction to the rod end
- Plan the weld bead around the machined angle
- Inspect the weld for cracks after the first trail runs
Specifications
| Brand | Blue Torch Fabworks |
|---|---|
| Part number | BTFBTF07003 |
| Thread size | 3/4 inches – 16 |
| Thread direction | Right hand |
| Minimum tube ID | 1 inch |
| Tube size | 1-1/2 od x 1/4 wall DOM |
| Material | Cold roll steel |
| Weld surface | Machined to a 45 degree angle |
| Jam nut | Not included |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit part, so choose it by thread size and tube inside diameter: 3/4 – 16 right hand rod ends in tube with a minimum 1 inch ID. Confirm the rod end and tube size match your build before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cross drill the end of the tube before welding to add weld area. The weld surface is already machined to 45 degrees, so plan the bead around that angle. Obtain a jam nut separately to lock the rod end. Welding is hot work and should be done by a qualified fabricator with proper equipment and eye and skin protection.
What’s included
The link insert.
Not included: Jam nut, plus the steel tubing and rod end that the insert is welded into.









