Overview
The Rubicon Express RM12070 is a 6-inch threaded rod with a 1-inch-14 right-hand thread. It is a builder part for fabricating custom links, and the minimum tube inside diameter is 1 inch.
It is a universal builder part and is not tied to a specific vehicle. Use it for off-road fabrication, and note that the jam nut is not included.
Key features
- 6-inch threaded rod
- 1-inch-14 thread size
- Right-hand thread direction
- Minimum tube inside diameter of 1 inch
- Jam nut not included
Fabrication tips
Threaded rods like this one set the working length of an adjustable link. The rod threads into a tube end, and length is chosen by how far it is turned in. Before cutting or welding, mark the tube, dry-fit the rod, and confirm the thread engages fully without bottoming out. Short thread engagement can strip under load, so leave enough thread inside the tube for the joint to carry its share of the force.
Clean the threads of dirt and weld spatter before assembly, and keep heat away from the threads themselves. Once the length is set, lock the rod with a matching jam nut tightened against the tube end. Inspect the rod, nut and tube after the first few trail runs for movement or galling.
- Measure the tube inside diameter at both ends
- Dry-fit before any heat is applied
- Match the jam nut to the 1-inch-14 thread
- Recheck lock nut tightness after early use
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RM12070 |
| UPC | 614901445336 |
| Rod length | 6 inches |
| Thread size | 1 inch-14 |
| Thread direction | Right hand |
| Minimum tube inside diameter | 1 inch |
| Jam nut | Not included |
| Fitment | Universal fit |
Vehicle fitment
This threaded rod is a builder part and is not vehicle-specific. Choose the rod length and thread for the tube or joint it will connect.
Confirm the thread and tube diameter against your build before cutting or welding.





