Overview
The Trail Gear Tube Clamp kit, part number 180126-KIT, is a two-piece steel clamp for 1.75 inch tubing. It lets you attach a suspension or steering bracket to a section of tube without welding the bracket to the tube, which suits brackets that need adjusting or frequent removal. Trail Gear calls these O.D. Tube Clamps and lists them as a universal fit for 1.75 inch tubing.
This O.D. tube clamp suits shock brackets on suspension links and steering brackets on steering rods or links. It also lets steel mounting brackets attach to aluminum suspension links and steering rods, which cannot be welded to steel brackets directly. It is sold individually and is not tied to a particular vehicle.
Key features
- Sized for 1.75 inch tubing.
- Two clamp halves that fit around the tube.
- Zinc plated screws included.
- Manufactured from 1020 steel.
- Clamping force of up to 8,600lbs.
- Works for shock brackets, steering brackets and aluminum suspension links or steering rods.
Working with aluminum links
Aluminum suspension links and steering rods are common upgrade parts, but they cannot take a welded steel bracket without weakening the tube. A two-piece clamp lets you mount a steel bracket on the aluminum section and keep the weld off the tube. Before fitting, look for dents, cracks, or corrosion at the clamp location, because damaged tube can slip under load.
Choose the clamp by tube diameter, measured at the exact spot where the bracket will sit. Make sure the clamp sits square on the tube and does not rest on a weld seam or bend. After installation, re-check the screws after the first few drives and again each time the bracket is adjusted or removed.
- Measure the tube diameter at the mount point
- Inspect the tube for dents and corrosion
- Re-tighten screws after the first drives
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 180126-KIT |
| UPC | 70000621429 |
| Tube size | 1.75 in. |
| Clamp design | 2 clamp halves |
| Material | 1020 steel |
| Clamping force | Up to 8,600lbs |
| Hardware | Zinc plated screws included |
| Sold | Individually |
Vehicle fitment
No vehicle is named for these clamps. The product is marked as universal fit for 1.75 inch tubing, so the match is by tube size rather than by year, make or model. Measure the tube diameter at the bracket location before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The clamp takes the place of welding at the mounting point, so it suits brackets that must stay adjustable or removable. Tighten the screws to a firm, even clamp before loading the suspension or steering. Because the clamp carries suspension and steering loads, check the clamp and screws periodically for tightness.
What’s included
The kit includes two clamp halves and zinc plated screws, and it is sold individually. Not included: The steel mounting brackets that attach to the clamp are separate parts and are not included.









