Overview
The Trail Gear Interlocking Tube Clamp kit, part number 180111-KIT, is a 1.75 in clamp for holding a support tube across a truggy or buggy. It is machined from 4130 chromoly.
The interlocking design lets a builder remove a motor, transmission or seat while the support tube stays across the frame. The clamp is universal fit, with no vehicle years, makes or models named.
Key features
- Machined from 4130 chromoly
- 1.75 in diameter and .095 in wall thickness
- Interlocking design gives flexibility to remove a motor, transmission or seat
- Counter sunk Allen head screw
Tube clamp installation tips
Before mounting a tube clamp, take a close look at the tube and the surfaces the clamp will touch. Remove paint, grease and loose scale where the clamp will sit, since a clean metal surface helps the clamp hold its position under load. Test-fit the clamp and confirm the tube sits square before tightening anything.
Once the clamp is in place, check alignment again after the first few runs. Chromoly parts are strong, but vibration can still work fasteners loose, so inspect the screw head and the clamp body for cracks or rounding. Keep a small Allen key with the build so you can recheck the hardware in the field.
- Clean the tube and clamp contact areas before assembly
- Check tube alignment before final tightening
- Recheck fasteners after the first few runs
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 180111-KIT |
| UPC | 70000621355 |
| Material | 4130 chromoly |
| Diameter | 1.75 in |
| Wall thickness | .095 in |
| Fastener | Counter sunk Allen head screw |
| Included | 1 tube clamp and 2 Allen head bolts |
Vehicle fitment
This clamp is universal fit and is not vehicle-specific. No year, make or model is named, so the fit depends on the tube size and frame layout on your truggy or buggy.
Measure the tube diameter on your build and match it to 1.75 in before ordering.
Installation notes
The clamp is fastened with a counter sunk Allen head screw, so an Allen key is required. The kit includes two Allen head bolts for the job.
What’s included
One tube clamp and two Allen head bolts.
Not included: The support tube that the clamp holds is not part of the kit.









