Overview
The Trail Gear 110137-1-KIT is a weld-in threaded tube adapter, sold each, designed for Heim and Johnny Joints. It has a 3/4 Inches – 16 left hand thread and fits tubing with a minimum tube ID of 1 Inch. It is a universal fit part, not tied to a particular vehicle.
Weld-in bungs like this one give a joint a threaded socket on a tube you are building or modifying. Check that your tube ID meets the stated minimum before welding.
Key features
- Weld-in design for Heim and Johnny Joints
- Left hand thread
- Thread size 3/4 Inches – 16
- Minimum tube ID 1 Inch
- Sold each
Weld-in tubing considerations
Tubing wall thickness and material shape how a weld-in bung performs. Thin wall tube can burn through or distort during welding, while heavier wall material takes heat differently and needs more care to fuse. Choose tubing that suits both the load on the joint and the welding process available, and keep the inside diameter large enough for the bung to seat fully.
Heat from welding can affect nearby threads and the tube, so protect the bung from spatter and check thread fit after the piece cools. Fixture the bung square before tacking, and avoid moving the tube while the weld cools. Loads on Heim and Johnny Joint setups often pull at the bung, so a clean, full weld matters more than appearance.
- Match tube material to the welding process
- Confirm inside diameter before cutting
- Protect threads from weld spatter
- Check thread fit once the piece cools
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110137-1-KIT |
| UPC | 70000621489 |
| Thread size | 3/4 Inches – 16 |
| Thread direction | Left hand |
| Minimum tube ID | 1 Inch |
| Jam nut | Not included |
| Fitment | Universal Fit |
| Sold | Each |
Vehicle fitment
It is a universal fit tube fitting for Heim and Johnny Joints rather than a vehicle-specific part. Fit depends on your build and tubing, not a year, make or model.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a weld-in part, so it must be welded to the tube. Confirm the tube ID meets the 1 Inch minimum before welding, and weld only with equipment and skills suited to the tubing material.
What’s included
The adapter, sold each.
Not included: Jam nut.









