Overview
The Currie CE-9115BL is a left hand weld-in bung with a matching jam nut, made for forged Johnny Joint rod ends and other 7/8 inch thread rod ends.
The hex shape, not round, eases bar adjustment, and a 1-3/8 inch wrench takes the hex. It is designed to fit a tube with a 1-1/4 inch inside diameter.
Key features
- Left hand 7/8 inch -18 thread
- Weld-in for Johnny Joint and 7/8 inch rod ends
- Hex shape for bar adjustment
- Custom machined jam nut included
- 1-1/4 inch tube inside diameter
Working with hex bungs
A hex bung gives you a flat-sided grip, so the rod end can be turned with a wrench instead of a spanner on a round body. That makes length changes quicker on the trail and less likely to slip under load. Before you buy, check that your joint thread and tube size fit together, and that the hex size works with the tools in your kit.
Setting a jam nut is the step most people rush. Thread the rod end in to the length you need, run the jam nut down firmly against the bung, and check that the joint still swivels freely afterward. Recheck the lock after the first few runs, since vibration can slowly back the nut off on rough ground.
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9115BL |
| UPC | 817783000451 |
| Thread size | 7/8 in – 18 |
| Thread direction | Left hand |
| Hex wrench size | 1-3/8 inch |
| Tube inside diameter | 1-1/4 inch |
| Jam nut | Included, custom machined, same hex size as the bung |
| Fitment | Universal fit |
Vehicle fitment
Universal fit, not vehicle-specific. Match the 7/8 inch -18 thread and 1-1/4 inch tube to your joint and tubing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Weld-in means the bung is welded into the tube, so have a qualified welder install it on a tube with a 1-1/4 inch inside diameter.
What’s included
A left hand weld-in bung and a custom machined jam nut with the same hex size.









