Select your vehicle

Trail Gear Threaded Tube Adapter – 110074-1-KIT

Trail Gear

$19.96In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 12:30 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Weld-in threaded tube adapter (bung) with a 1.25 in. -12 right-hand thread
  • Designed for Heim and Johnny Joints with a minimum tube ID of 1 inch
  • Jam nut not included
  • Universal fit, not tied to a specific vehicle

Description

Overview

The Trail Gear 110074-1-KIT is a threaded tube adapter, a weld-in bung with a 1.25 in. -12 right-hand thread. It is made for Heim and Johnny Joint setups and is a universal fit part rather than one built for a specific vehicle.

Key features

  • Weld-in bung that threads into tubing for Heim and Johnny Joint use
  • Right-hand thread, 1.25 in. -12
  • Minimum tube ID of 1 inch
  • Universal fit, with no vehicle year, make or model given

Welding and tube preparation

A weld-in bung works only when the tube and bung are cleaned, aligned and welded square. Remove paint, mill scale and oil from the weld area, and confirm the bung sits squarely so the threads will be straight once welded. Heat from welding can distort thin tubing, so plan the sequence to limit warpage.

Once the bung is in place, check that the thread runs true and that the jam nut will seat against the tube without binding. A joint that is misaligned at this stage will put side load on the Heim or Johnny Joint and shorten its life.

  • Clean the weld area before fitting the bung
  • Check thread alignment after welding
  • Test fit the jam nut before final assembly

Specifications

Brand Trail Gear
Part number 110074-1-KIT
UPC 70000621486
Type Threaded tube adapter (weld-in bung)
Thread size 1.25 in. -12 (1-1/4 inches -12)
Thread direction Right hand
Minimum tube ID 1 inch
Jam nut Not included

Vehicle fitment

It is a universal fit part, so it is not tied to a specific year, make or model. Fit depends on the joint and tubing it is welded into.

Check that your Heim or Johnny Joint setup and tube size match the 1 inch minimum tube ID. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

This is a weld-in bung, so it must be welded to the tube and is not a bolt-on part. Welding should be done by a qualified welder. A jam nut is not included and must be obtained separately.

What’s included

One threaded tube adapter (weld-in bung), Trail Gear 110074-1-KIT.

Not included: Jam nut.

SKU: TGI110074-1-KIT Category:

Specification

Shipping weight 0.60 lbs
Package dimensions 7.50 × 7.50 × 3.50 in
brands

Questions & Answers

What is the Trail Gear 110074-1-KIT?

It is a threaded tube adapter, a weld-in bung with a 1.25 in. -12 right-hand thread. The product is designed for Heim and Johnny Joints and has a minimum tube ID of 1 inch.

Does the Trail Gear 110074-1-KIT come with a jam nut?

No. The jam nut is not included, so one must be obtained separately to lock the adapter in place after welding.

Will this adapter fit a specific vehicle?

It is a universal fit part, and no vehicle year, make or model is tied to it. Check your Heim or Johnny Joint setup and tubing size before welding.

What thread size does it use?

It uses a 1.25 in. -12 right-hand thread, also written as 1-1/4 inches -12, and the minimum tube ID is 1 inch.

Can a weld-in bung be removed later?

Removing a welded bung is difficult and usually means cutting or grinding the tube. It is best to confirm alignment and tube fit before welding so the bung stays in place.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon