Select your vehicle

Trail Gear Threaded Tube Adapter – 110123-1-KIT

Trail Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Trail Gear 110123-1-KIT right hand weld-in threaded tube adapter bung
  • 1 inch -14 thread
  • 1 inch minimum tube ID
  • Universal fit; jam nut not included

Description

Overview

The Trail Gear 110123-1-KIT is a 1 inch -14 right hand weld-in bung and threaded tube adapter for Heim and Johnny Joint rod ends. It accepts tubing with a 1 inch minimum tube ID and is a universal fit part.

No jam nut comes with this bung, so add one if your rod end setup needs it. Compare the thread direction with your joint before welding.

Key features

  • 1 inch -14 right hand thread
  • 1 inch minimum tube ID
  • Weld-in for Heim and Johnny Joint rod ends
  • Universal fit
  • Jam nut not included

Choosing a rod end setup

A threaded bung like this one gives a rod end a female socket on the end of a tube, so the joint can be threaded in and adjusted for length. Setup choices start with the joint itself. Heim joints and Johnny Joints use threads that vary in size and direction, so the bung thread has to match the joint before any cutting or welding begins. Measure the tube inside diameter at the weld point rather than relying on the nominal tube size.

Jam nuts are usually run on the threaded shank after the rod end is set to length, locking the adjustment in place. Because this bung is right hand threaded, the jam nut must share that direction. Test-fit the joint dry before welding, and keep the bung square to the tube so the rod end stays aligned under load.

  • Confirm the joint thread before ordering
  • Check tube inside diameter at the weld point
  • Test-fit the jam nut and joint before welding
  • Inspect threads for damage after trail use

Specifications

Brand Trail Gear
Part number 110123-1-KIT
UPC 70000621488
Thread size 1 inch -14
Thread direction Right hand
Minimum tube ID 1 inch
Jam nut Not included
Fitment Universal fit

Vehicle fitment

It is a universal fit part with no vehicle named, so check the thread and tube size against your build before welding.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because this is a weld-in part, the tube and bung need a proper weld, which should be done by a qualified fabricator.

What’s included

Threaded tube adapter bung.

Not included: Jam nut.

SKU: TGI110123-1-KIT Category:

Specification

Shipping weight 0.75 lbs
Package dimensions 7.50 × 7.50 × 3.50 in
brands

Questions & Answers

What is the thread on the Trail Gear 110123-1-KIT?

It is a 1 inch -14 thread running right hand. The part is a weld-in bung and tube adapter with a 1 inch minimum tube ID, listed by Trail Gear.

Is the jam nut included?

No. The jam nut is not included, so add one if your joint setup calls for it. Make sure its thread matches the right hand bung.

Will this fit my vehicle?

It is a universal fit part, so no specific vehicle is named. Check the rod end thread and tube size against your build before welding. Confirm fit for your vehicle's year, model and trim before ordering.

How often should a weld-in rod end bung be inspected?

Check it after every few trail sessions and after any hard impact. Look for cracks at the weld, a bent tube near the bung, and thread wear. Tighten the jam nut and re-check alignment whenever you notice play or binding in the joint.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon