Overview
The Trail Gear 110121-1-KIT is a 7/8 inch -14 right hand weld-in bung, a threaded tube adapter for Heim and Johnny Joint rod ends. It has a 1 inch minimum tube ID and is universal fit.
The jam nut is not included with this kit. Verify the thread size against your rod ends before welding the bung into place.
Key features
- 7/8 inch -14 right hand thread
- 1 inch minimum tube ID
- Designed for Heim and Johnny Joint rod ends
- Universal fit
- Jam nut not included
Choosing rod ends and tubing
Rod ends come in several thread sizes and directions, so the bung and the rod end need to match before any tubing is cut. A right hand thread on the bung pairs with a right hand rod end, and a mismatch means the joint cannot be adjusted properly. Measure the rod end thread with a gauge or caliper and compare it before welding.
Tubing wall thickness and diameter also matter. The inside diameter must meet the minimum, and thin walls may not hold a weld well under the loads of off-road use. Use a tube that suits the joint’s load path, and plan a jam nut if the joint needs locking in place. Inspect the joint after rough trail days and retighten the jam nut as needed. Keep a few spare jam nuts on hand so a replacement is simple.
- Measure the rod end thread before cutting
- Confirm the tube inside diameter
- Keep spare jam nuts for trail repairs
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110121-1-KIT |
| UPC | 70000621492 |
| Thread size | 7/8 inch -14 |
| Thread direction | Right hand |
| Minimum tube ID | 1 inch |
| Jam nut | Not included |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit and is not written for any vehicle, so the rod end thread and tube size decide the match.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Weld-in bungs need a tube that meets the 1 inch minimum ID and a weld made by a qualified fabricator. Confirm your rod end thread is 7/8 inch -14 first.
What’s included
Threaded tube adapter bung.
Not included: Jam nut.









