Overview
The Trail Gear hydraulic hose for ram steering, part number 130255-1-KIT, is a single line hose that measures 50 inches long. It is made for hydraulic ram steering setups.
Trail Gear describes its hydraulic steering ram components as covering everything from a single seal for custom work to complete systems, and this hose is one of those components. Check the line count and fittings against your ram before connecting it.
Key features
- 50 inch long
- Single line design
- Made for hydraulic ram steering systems
- Part of Trail Gear’s hydraulic steering ram range
Routing and protection
A hydraulic steering line works under pressure and constant flexing, so its route matters as much as its length. Keep the hose away from exhaust heat, sharp edges and tire contact, and allow enough slack for suspension travel without letting the line rub. A short, tight run can pull on fittings during articulation, which is why a clean route is worth planning before the first fill.
Look for scuffing, bulging, cracked covers or weeping at the fittings. Hoses that are kinked or twisted lose flow and can fail early. When replacing a hose, replace the matching fittings and clamps as well, and bleed the system after any line work to remove trapped air.
- Use hose guards where the line passes near rock or frame edges
- Check fittings for seepage after each trail session
- Keep fluid topped to the level your system’s manual requires
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 130255-1-KIT |
| UPC | 70000621602 |
| Length | 50 in. |
| Line type | Single line |
| Application | Hydraulic ram steering |
Vehicle fitment
No vehicle is named for this hose. It has a direct fit designation without years, makes or models, so match the hose length and fittings to your steering ram instead.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Route the hose clear of moving suspension and steering parts, and check each fitting for leaks once the system is filled. Hydraulic lines under steering load should be inspected regularly.
What’s included
One 50 inch single line hydraulic hose.
Not included: the steering ram, pump and fittings, since the product covers the hose only.









