Select your vehicle

Crown Automotive AMC Model 20 CJ Narrow-Trac Rear Passenger Side Axle Shaft Kit – 8127071K

Crown Automotive

$148.25In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 3:30 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 1976–1983 CJ5, 1976–1981 CJ7 and 1981 Scrambler
  • AMC Model 20 rear passenger side axle shaft kit
  • 29.25 inches long, 29 splines

Description

Overview

The 8127071K is an AMC Model 20 rear passenger side axle shaft kit, 29.25 inches long with 29 splines. It fits the 1976–1983 Jeep CJ5, the 1976–1981 CJ7 and the 1981 Scrambler. It is the longer of the pair and serves the rear axle of Narrow-Trac CJ models, where the AMC Model 20 is used.

The kit has 29 splines and is a Model 20 axle shaft kit. Check the kit parts against your installation before starting. It is the passenger side half of a pair and is the longer one. The Narrow-Trac designation means the narrower rear axle width used in CJ models, so a Jeep with a wide-track axle needs different parts. Fit is limited to the years below for each model, and later CJ7s and YJs are not covered.

Key features

  • Passenger side rear axle shaft kit
  • AMC Model 20 axle
  • 29.25 inches long
  • 29 splines
  • Narrow-Trac CJ application
  • Classed by Crown Automotive as a direct fit

Matching a shaft pair

Rear axle shafts are usually replaced as a left and right pair, since the wear on one side often mirrors the other. Before installing, confirm the shaft is for the passenger side by checking its length and the spline count against the old shaft. Mismatched sides can leave the axle flange misaligned and cause early bearing wear.

During installation, inspect the differential pinion seal and the axle seal for leaks, since these are easy to replace while the shaft is out. Clean the splines and apply a light coat of appropriate lubricant to the shaft ends. Work slowly when seating the shaft so the splines engage fully before the retainer is fitted.

  • Compare length and splines with the old shaft
  • Inspect the pinion seal while the shaft is out
  • Clean splines before fitting

Specifications

Brand Crown Automotive
Part number 8127071K
UPC 848399078060
Axle manufacturer AMC
Shaft location Passenger Side
Axle position Rear
Axle type AMC 20
Position Rear
Spline count 29 Splines
Length 29.25 inches
Kit Model 20 axle shaft kit

Vehicle fitment

The 8127071K fits CJ-era Jeeps.

  • 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade)
  • 1976–1981 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Renegade)
  • 1981 Jeep Scrambler (Base)

Coverage runs 1976–1983 for the CJ5, 1976–1981 for the CJ7 and 1981 for the Scrambler. YJ Wranglers and later CJ7s are not covered. Confirm your vehicle’s year, model and trim before ordering.

SKU: CRO8127071K Category:

Specification

Shipping weight 22.90 lbs
Package dimensions 36.00 × 8.00 × 8.00 in
brands

Fitment

VehicleYearsTrims
Jeep CJ51976–1983Base, Golden Eagle, Laredo, Limited, Renegade
Jeep CJ71976–1981Base, Golden Eagle, Golden Hawk, Laredo, Renegade
Jeep Scrambler1981Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which Jeeps use the Crown 8127071K?

It fits the 1976–1983 CJ5, the 1976–1981 CJ7 and the 1981 Scrambler for the passenger side of the AMC Model 20 rear axle.

How long is the 8127071K?

29.25 inches, with 29 splines. It is the longer, passenger side shaft kit for the AMC Model 20 rear axle, and the driver side kit is shorter.

Does the 8127071K fit the driver side?

No. It is the passenger side kit, and the driver side kit is listed by Crown Automotive under the separate part number 8127070K, so the two are not interchangeable.

How do I tell which side an axle shaft belongs on?

Compare the length of the new shaft with the old one, and check the side marking on the kit. The shaft is for the passenger side if its length matches the passenger position on the axle.

Should the axle seal be replaced during shaft installation?

It is a good idea. The seal is easy to access while the shaft is out, and replacing it avoids leaks that can damage the bearing and brake parts.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon