Select your vehicle

Trail Gear Longfield Axle – 301705-1-KIT

Trail Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Longfield axle, inner long, 30 splines
  • Front left inner position
  • Fits 1967–1984 Toyota Land Cruiser models
  • Trail Gear part number 301705-1-KIT

Description

Overview

The Trail Gear 301705-1-KIT is a Longfield axle with 30 splines in the front left inner position. It is a direct fit for the 1967–1984 Toyota Land Cruiser.

It is a Longfield axle, an inner long shaft with 30 splines, sold under kit number 301705-1-KIT. Land Cruiser owners often choose a shaft like this when upgrading the front driveline. Confirm the front axle type of your truck, the spline count you need and whether the inner long position matches the driver side before ordering.

A Longfield axle is a named style of axle shaft used on older Land Cruiser front ends, and it mates with a particular joint and hub arrangement. The kit number carries a KIT suffix. The Land Cruiser range spans several generations, so match the axle type, spline count and year of your truck before choosing this shaft.

Key features

  • Longfield axle, inner long shaft
  • 30 splines
  • Front left inner position
  • Direct fit
  • Fits the 1967–1984 Toyota Land Cruiser.

Choosing the right axle shaft

A replacement axle shaft has to match the joint, spline count and hub on the truck it goes into. Splines that look similar can differ in count or pitch, and a mismatch will wear quickly or refuse to seat. Measuring the old shaft and comparing it with the new one before installation avoids most fit problems, and it helps to photograph the old assembly for reference.

Axle shafts seldom fail alone. Wheel bearings, seals and hub parts take the same load, so a new shaft is often installed at the same time as a new bearing and seal. Clean hub surfaces and fresh grease help the shaft last longer and keep dirt out of the joint.

  • Compare spline count and pitch before installing
  • Inspect hub and bearing surfaces
  • Replace seals to keep grease in the joint

Specifications

Brand Trail Gear
Part number 301705-1-KIT
UPC 700006930041
Part type Axle shaft (Longfield axle), inner long
Spline count 30 splines
Position Front left inner
Fit type Direct fit

Vehicle fitment

It fits the 1967–1984 Toyota Land Cruiser, a range covering several generations, so the exact model, axle and year matter when matching a shaft.

The list names the Land Cruiser only. Other Toyota models and Land Cruisers built after 1984 are not covered. Confirm your vehicle’s year, model and trim before ordering.

SKU: TGI301705-1-KIT Category:

Specification

Shipping weight 9.00 lbs
Package dimensions 36.00 × 7.00 × 7.00 in
brands

Fitment

VehicleYearsTrims
Toyota Land Cruiser1967–1984Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What vehicles does the Trail Gear 301705-1-KIT fit?

It fits the 1967–1984 Toyota Land Cruiser. Other Toyota models and Land Cruisers built after 1984 are not covered, so confirm the axle type for your truck before ordering.

How many splines does the 301705-1-KIT have?

It has 30 splines and is a Longfield axle in the inner long position on the front left. Confirm the spline count your axle needs before ordering.

What is the 301705-1-KIT made of?

Confirm the construction and the included parts before choosing this axle for your truck. Check the package contents against your installation before starting the work.

Which side is the 301705-1-KIT?

It is the front left inner position, the driver-side inner shaft, and it is an inner long axle. Confirm the side and axle type against your truck before installing.

Should wheel bearings and seals be replaced with a new axle shaft?

Often, yes. Inspect the bearings, seals and hub at the same time, since a clean hub makes installation easier. Replace worn parts so the new shaft is not exposed to dirt or water.

How can I tell if the old axle shaft is worn?

Look for twisted or cracked splines, clicking on turns, and grease leaking past the seal. Compare the spline wear with the new shaft before installing it, so you know the old part was the problem.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon