Overview
The Trail Gear Rock Ring Bolts, part number 140122-1, are an axle king pin part from Trail Gear. It is universal fit. Confirm the bolt size and material before ordering.
King pin parts sit at the steering knuckle pivot on an axle, a location where fit and wear matter. Because the category is the only application detail given, check the bolt’s thread size, length and hardware kit against your axle and knuckle before ordering. Quote part number 140122-1 when you contact the brand.
Ring bolts of this kind are fitment-sensitive, so treat the universal fit label as a starting point rather than a guarantee for any specific truck or Jeep.
Key features
- Trail Gear brand, part number 140122-1
- Listed in the axle king pin parts category
- Fitment field marked universal fit
- Detailed specifications are not published
Why king pin fasteners matter
King pin fasteners hold the knuckle to the axle at a pivot that carries steering and braking loads. A loose or worn bolt can change the steering geometry and load the bushings unevenly, so this is not a place to guess. Inspect the threads and the bore before installing anything new.
Use fresh fasteners when a bolt has been removed, and clean the threads so the tightening reads correctly. Thread locker, if used, should match the type your service procedure calls for. After the work is done, recheck the steering geometry and look for any play at the pivot once the vehicle is back on the ground.
- Thread condition and engagement
- Bolt length matched to the bore
- Bore free of wear and scoring
- Steering geometry checked after work
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 140122-1 |
| Category | Axle King Pin Parts |
| Fitment field | Universal fit, per brand |
Vehicle fitment
Trail Gear marks the part universal fit. No specific axle or vehicle is confirmed for it.
Confirm your vehicle’s year, model and trim before ordering. Check the bolt size against your king pin hardware first.
Installation notes
King pin work involves steering components, so support the vehicle on stands rather than a jack and check the steering geometry once the work is finished.
What’s included
Confirm the quantity and any included hardware before ordering.









