Overview
The Trail Gear 130587-1-KIT is a left heavy duty rod end, part number 130587-1-KIT, with a 1 inch bore and left-hand thread direction. Trail Gear describes its FJ-80 tie rod ends as ideal for Toyota crossover steering applications.
The rod end is greased for life and sealed, and it includes a cotter pin and jam nut. The fitment field reads universal fit, but no model years are given.
Key features
- Heavy duty rod end
- Greased for life
- Sealed construction
- 1 inch bore
- Left-hand thread direction
- Includes cotter pin and jam nut
Greasing and inspection of rod ends
A greased-for-life rod end has its lubricant sealed inside, so routine greasing is not possible and the seal is the key point to inspect. Look for torn seals, stiffness when the joint is moved by hand, and play at the stud. A damaged seal lets dirt in, which speeds wear, so replacing the end is usually the right call rather than attempting to add grease.
Cotter pins should be replaced whenever the castle nut is removed, and the jam nut should be snug against the rod end after setting length. Confirm the thread direction before assembly, since a left-hand end must go on the left side of the linkage.
- Check the seal for tears or leaks
- Replace the cotter pin when the nut is removed
- Confirm left-hand thread before assembly
- Set the jam nut after adjusting length
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 130587-1-KIT |
| UPC | 70000621501 |
| Position | Left |
| Bore | 1 inch |
| Shank | N/A |
| Thread direction | Left hand |
| Lubrication | Greased for life |
| Sealing | Sealed |
| Included | Cotter pin and jam nut |
| Fitment | Universal fit (manufacturer listing) |
Vehicle fitment
It is designed for FJ-80 steering applications and is marked universal fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The left-hand thread direction means this end must match the left side of your linkage, so check the thread before installing.
What’s included
One left rod end with cotter pin and jam nut. Check the package contents against your installation before starting.









