Overview
The Trail Gear Differential Drop Kit, part number 300814-1-KIT, is a front differential drop kit with aluminum spacers. It lowers the front differential when installed, and its included hardware is zinc-plated.
Key features
- Front differential position
- Aluminum spacers
- Zinc-plated Grade 8 hardware
- Zinc-plated Class 8.8 bolts
Driveline after a drop
A front differential drop kit moves the differential lower in the frame, which changes the angle between the transfer case output and the front driveshaft. Greater angle can cause vibration at speed and wear the u-joints faster. Measuring pinion and driveshaft angles before and after installation helps show whether the change is within a workable range.
Spacers add leverage on the axle mounts and bolts, so inspect the spacers, hardware and any brake or steering lines for clearance after a few drives. Aluminum spacers resist corrosion, but fasteners still need periodic torque checks. If vibration appears, a driveshaft shim or a different driveshaft may be needed, and the front axle breather and vent hoses should be routed so they stay clear of the new position.
- Measure driveline angles before and after
- Check brake lines and steering clearance
- Inspect u-joints for play after rough use
- Re-torque hardware after the first trail runs
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 300814-1-KIT |
| UPC | 70000668680 |
| Location | Front |
| Spacers | Aluminum |
| Hardware | Zinc-plated Grade 8 |
| Bolts | Zinc-plated Class 8.8 |
| Fitment | Direct Fit (no vehicle named) |
Vehicle fitment
Trail Gear’s Direct Fit mark names no year, model or trim, so verify the axle and vehicle first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lowering the front differential changes driveshaft angle, so check driveline angles and alignment after the kit is installed.
What’s included
Aluminum spacers, zinc-plated Grade 8 hardware and zinc-plated Class 8.8 bolts.









