Overview
Revtek’s RTDD2-KB is a differential drop spacer kit for lowering an axle’s differential housing. The model code RTDD2-KB is the identifier to use, and the UPC is 811323010849.
It is marked Direct Fit. Make sure your vehicle’s year, model and trim match before ordering.
Choosing and fitting a drop kit
A differential drop kit moves the carrier down relative to the axle tubes, which changes pinion angle and driveline geometry. Choosing the right kit means matching the drop height to the suspension and the driveshaft length you have. Stacking a drop on a lifted suspension without rechecking angles is a common cause of driveline vibration.
Before ordering, measure the current pinion angle and the driveshaft length so you can compare them with what the setup will need. Plan to check brake line slack and the axle breather, since both move with the housing. A torque check after the first drives helps catch loosening early.
- Measure pinion angle before and after
- Check brake line and breather length
- Inspect u-joints after rough trail use
Specifications
| Brand | Revtek |
|---|---|
| Model | RTDD2-KB |
| UPC | 811323010849 |
| Type | Differential drop spacer kit |
| Fitment | Direct Fit (no vehicle named) |
Vehicle fitment
Check your axle and vehicle against the model code RTDD2-KB before choosing this kit.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Look over the spacers, bolts and other hardware against your installation before starting.









