Overview
The Trail Gear Creeper Toyota U-joint, part number 100065-1-KIT, is a forged universal joint for 4WD Toyota drive shafts from 1979 to 1995. It fits most 1979-1995 4WD applications, but it will not fit a shaft with a CV head.
Trail Gear added material to the center of the stock joint and tested it to 4,700 ft-lbs of torque in its axle testing machine. The kit includes four install clips and a Zerk grease fitting.
Key features
- Forged body
- Extra material at the center of the joint
- Tested to 4,700 ft-lbs of torque
- Lubeable, with a Zerk grease fitting
- Includes four install clips
Greasing and inspection
A universal joint is a simple pivot, and it depends on lubrication to keep the bearing caps moving freely. Because this joint has a grease fitting, it can be serviced without removing the shaft. Regular greasing keeps the cross and caps protected from water and grit, especially after wet or muddy trail use.
Before installing, confirm the drive shaft is not a CV-head type, since the joint is built for non-CV shafts. Check that the install clips are seated and the bearing caps sit square in their yokes. Once the drive is back together, listen for clicking or vibration on a short test drive.
- Grease after wet or muddy trail use
- Check the install clips are fully seated
- Inspect the cross for grooves or play
- Keep the shaft balanced after any repair
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 100065-1-KIT |
| UPC | 70000621229 |
| Body | Forged |
| Torque test rating | 4,700 ft-lbs |
| Lubeable | Yes |
| Stated application | 1979-1995 4WD Toyota |
| Not compatible with | CV head |
| Included | Four install clips and Zerk grease fitting |
Vehicle fitment
It is for 1979-1995 4WD Toyota applications. Confirm fit for your vehicle’s year, model and trim before ordering.
It will not fit a CV head. Check the drive shaft type and confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes four install clips and a Zerk grease fitting, so the joint can be greased once installed. Confirm the drive shaft is not a CV-head type before fitting it.
What’s included
Four install clips and a Zerk grease fitting.









