Overview
The Rubicon Express TJ/LJ 3.5 inch Super-Flex adjustable upper and fixed lower system is a complete suspension for TJ and LJ Wranglers that keep factory short arm geometry. It is designed to combine flexibility and handling.
The system includes eight new control arms, with adjustable upper arms at the front and rear and serviceable Super-Flex spherical ball joints. It also includes an adjustable front track bar, replacement 3.5-inch lift springs, extended bump stops, longer front stainless steel brake lines and Gen II sway bar disconnects.
Key features
- Eight new control arms
- Adjustable upper front and rear arms
- Super-Flex spherical ball joints
- Adjustable front track bar
- Replacement 3.5-inch lift springs
- Extended bump stops
- Gen II sway bar disconnects
Planning a full suspension swap
A complete suspension system changes several parts at once, so the install is best planned as one job. Control arms, springs and bump stops all affect how the axles move and how the vehicle sits, so the parts should be looked at together rather than one at a time. Brake lines and sway bar links often need attention during the same work.
Set aside time for the alignment and a check of the steering after the new arms are in. Look over the old bushings and mounts while everything is apart, since replacing worn parts at the same time avoids repeat work. Keep the hardware sorted by location so each bolt goes back where it came from.
- Replace worn bushings and mounts while the arms are off
- Check brake line length and routing
- Set alignment after the lift is complete
Specifications
| Brand | Rubicon Express |
|---|---|
| UPC | 614901148268 |
| Lift height | 3.5 inches |
| Control arms | Eight new, adjustable upper front and rear |
| Vehicles | TJ and LJ with factory short arm geometry |
Vehicle fitment
It fits TJ and LJ Jeep Wranglers with factory short arm geometry. The TJ covers 1997 to 2006 and the LJ covers 2004 to 2006.
Other Wrangler generations are outside this fit. Confirm the year, model and trim you own before buying.
Installation notes
This is a full suspension system rather than a single part, so the install replaces the control arms and springs. Confirm the brake line and sway bar disconnect fit before starting, and check alignment after the lift is set.
What’s included
Eight control arms, an adjustable front track bar, 3.5-inch lift springs, extended bump stops, longer front stainless steel brake lines and Gen II sway bar disconnects.
