Overview
The JK4344 is a 4.5-inch extreme-duty long arm lift kit with a 4-link front, a 3-link rear and no shocks. It fits the 2007-2018 Jeep Wrangler (JK) and belongs to Rubicon Express’s JK suspension line. The adjustable chromoly upper and lower control arms use Super-Flex spherical ball joints and PT-Meg Super-Ride bushings.
The system is designed for control and performance without limiting articulation. The full-width transmission crossmember adds durability and frame rigidity. Installation does not need welding. The kit is available in 3.5-, 4.5- and 5.5-inch versions, and optional high-performance monotube shocks are available for the system.
Key features
- 4.5-inch lift height, within the 3 to 4.99-inch range
- Extreme-duty 4-link front and 3-link rear long arm layout
- Adjustable chromoly upper and lower control arms
- Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings
- Full-width transmission crossmember
- Designed for installation without welding
- Optional monotube shocks and belly pan upgrades
Choosing shocks for a no-shock kit
Because this kit ships without shocks, the shock choice sets how the lift feels on the road and on the trail. Shock length must suit the arm geometry and the travel the arms allow, and the mounting positions must clear the frame and the axle at full extension and full compression.
Monotube designs are often chosen for steady damping under repeated hits, while factory style shocks may be fine for light use. Replace shocks in pairs on the same axle, and consider bump stops if the axle reaches the limit of travel on rough ground. Shock boots and mounting hardware wear with use, so inspect them with the rest of the suspension.
- Confirm shock length against the arm geometry
- Check mounting clearance at full extension
- Replace shocks in pairs on each axle
- Inspect bump stops after rough trail use
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK4344 |
| UPC | 70000651258 |
| System type | Extreme-duty 4-link front and 3-link rear long arm |
| Lift height | 4.5 inches (chart range 3 to 4.99 inches) |
| Control arms | Chromoly upper and lower, adjustable |
| Joints | Super-Flex spherical ball joints |
| Bushings | PT-Meg Super-Ride |
| Shocks | Not included |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler (JK).
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 4.5-inch 4-link front and 3-link rear layout changes control arm angles and pinion geometry. Check the alignment and driveline angles after the lift is in, and plan on separate shocks because none are included.
What’s included
The kit includes the adjustable chromoly upper and lower control arms, Super-Flex spherical ball joints, PT-Meg Super-Ride bushings and the full-width transmission crossmember.
Not included: shock absorbers.
The 4.5-inch version uses the same adjustable chromoly upper and lower control arms and Super-Flex spherical ball joints as the other heights in the series. Because this kit has no shocks, the buyer chooses the shock setup, and optional high-performance monotube shocks are one of the choices the brand offers for the system.
