Overview
The Rubicon Express RE7000 is a 4.5 inch Super-Flex short arm lift kit without shocks, made for the Jeep Wrangler TJ or LJ with factory short arm suspension geometry. It suits owners who want to keep the short arm layout while raising the vehicle.
The kit is a complete suspension system. It adds new control arms with Super-Flex spherical ball joints, an adjustable front track bar, replacement 4.5-inch lift springs, extended bump stops, longer front brake lines and Gen II sway bar disconnects. The listed lift height range is 3 to 4.99 inches.
No shocks are included, so the current shocks are kept or replaced separately when the kit is installed.
Key features
- 4.5 inch Super-Flex short arm lift
- New control arms with Super-Flex spherical ball joints
- Adjustable front track bar
- Replacement 4.5-inch lift springs
- Extended bump stops and longer front brake lines
- Gen II sway bar disconnects
- Adjustable upper control arms and fixed lower control arms
Keeping the short arm layout
Short arm suspensions work through a different set of control arm angles than long arm setups, so a lift on this layout depends on the arms and ball joints working together. Super-Flex spherical ball joints allow more articulation, but they also need regular inspection depending on how the vehicle is used. Off-road use puts more load on the joints, so check the boots and joint movement after each trip.
Longer front brake lines should be routed away from the control arms, springs and steering parts. Clearance checks at full steering lock and full suspension travel help prevent stretched or rubbing lines. Extended bump stops work with the new springs to limit travel, so inspect them whenever the vehicle is serviced.
- Check ball joint boots for tears
- Inspect brake lines at full steering lock
- Test sway bar disconnect movement after installation
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7000 |
| UPC | 614901441598 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Short arm |
| Kit type | Super-Flex short arm |
| Rear lift method | Coil springs |
| Shocks included | No |
| Fitment | Direct fit |
Vehicle fitment
It fits 1997–2006 Jeep Wrangler TJ models and 2004–2006 Jeep Wrangler LJ models.
For the JK, JL or Grand Cherokee, confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The control arms and track bar change the alignment, so an alignment is needed after installation. The extended bump stops and longer front brake lines are part of the kit.
What’s included
The kit includes new control arms with Super-Flex spherical ball joints, an adjustable front track bar, replacement 4.5-inch lift springs, extended bump stops, longer front brake lines and Gen II sway bar disconnects.
Not included: shocks.



