Overview
The TeraFlex VSS Shock Absorber, part number 1553100, is a gas charged shock that TeraFlex says was designed specifically for Jeep. It measures 24.5 in. extended and 15.41 in. collapsed, with a 9.09 in. stroke.
Confirm the Jeep model years, trims and lift height that suit this shock before ordering. Compare its measurements with the shock it would replace.
Key features
- Gas charged design
- 9.09 in. stroke
- Designed for Jeep vehicles
- Marked Direct Fit
Measuring before you buy
Length and stroke are the first numbers to check on any replacement shock. The extended length sets how far the shock reaches at full droop, the collapsed length sets its shortest span, and stroke is the travel between them. A shock that is too long can bind, while one that is too short can bottom out and strain mounts.
Measure the old shock eye to eye at both extremes, with the suspension unloaded and then with the vehicle on the ground. Compare those readings with the figures for the new shock before ordering. Note the mounting style and bushing size too, since a matching length with different eyes can still fail to fit.
Gas charged shocks are sensitive to heat and rough handling, so store them upright and keep them out of direct sun until installation. Look for oil seepage, a bouncy ride, or clunks at the mounts as signs that the old shock is worn.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1553100 |
| UPC | 843885022398 |
| Shock type | Gas charged |
| Extended length | 24.5 in. |
| Collapsed length | 15.41 in. |
| Stroke | 9.09 in. |
| Fitment type | Direct Fit |
Vehicle fitment
It is a Direct Fit for Jeep vehicles. Confirm your year, model and trim, and compare the dimensions with your current shock before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the extended and collapsed lengths, 24.5 in. and 15.41 in., with the shock being replaced before fitting. The 9.09 in. stroke is the travel between those two lengths.
What’s included
The package contains one shock absorber. Check the package contents against your installation before starting.








