Overview
The Pro Comp Suspension ES3000 324513 is a hydraulic shock absorber from the ES3000 Series, finished in white. Its lengths are vehicle specific, and it mounts at the factory upper and lower points. Confirm whether your vehicle needs a front or rear unit before ordering, and confirm fit for your vehicle’s year, model and trim.
It is a twin tube cellular gas design with 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. The valving changes damping as the suspension moves, which matters most when a truck carries a load or runs rough ground. Double welded mounts are fitted, and the shock is covered by the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- White finish
- Pro Comp Suspension limited lifetime warranty
Front or rear, and load
Shock position changes what the unit has to do. A front shock works through steering and braking loads, while a rear shock handles axle movement and weight transfer under acceleration. Knowing the position before ordering keeps the mounts and lengths in line with the truck’s suspension.
Twin tube gas shocks are a common design for trucks that carry loads or run rough trails. The valving controls how fast the shock moves, and wear shows up as slower control or harsher impacts. Check the piston rod and seals regularly, particularly after heavy use or wet trail runs.
- Identify whether the old shock is front or rear
- Check factory mounts for wear before reusing them
- Replace shocks in matched sets on the same axle
- Inspect the rod for scoring after rough use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 324513 |
| UPC | 614901042016 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the factory mount points and vehicle-specific lengths with the shock on your truck.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 324513.
Not included: the dust boot.












