Overview
The Daystar Scorpion KU01012 is a rear hydraulic twin-tube shock absorber for 1997–2006 Jeep Wrangler TJ and 2004–2006 Wrangler LJ vehicles with a 3 in. lift. It fits the TJ in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims, and the LJ Unlimited and Unlimited Rubicon.
Daystar says Scorpion shocks are tuned for each vehicle application, and this rear unit is tuned for Daystar Comfort Ride Lift and Leveling Kits. The twin-tube body adds oil capacity to reduce shock fade and resist foaming under severe conditions. Inside, a durable piston seal and a velocity-sensitive valving stack work with a chrome-hardened piston shaft. Each shock is sold individually.
Key features
- Rear position for Wrangler TJ and LJ suspensions
- Twin-tube hydraulic design with added oil capacity
- Designed to resist foaming and shock fade under severe conditions
- Velocity-sensitive valving stack and durable piston seal
- Chrome-hardened piston shaft
- Tuned for Daystar Comfort Ride Lift and Leveling Kits
- Black Daystar shock bushings and boot included
Rear shock fit and setup
A rear shock controls how the axle moves over bumps and how the body settles after a dip. On a Wrangler TJ or LJ, the rear shocks work with the leaf springs to keep the back end steady on rough trail and on pavement at speed. Worn units tend to let the rear bounce, pitch or wander, especially after a lift.
When choosing a rear shock, match the shock to your lift height and kit. A unit designed for a 3 in. lift may not suit a very different height, so measure your current ride height before ordering. If you run a comfort or leveling kit, keep the rest of the rear suspension in mind, since bushings, springs and track bars all change how the shock loads.
- Check the bushings and boot for cracks
- Look for oil seepage on the shock body
- Replace worn rear bushings at the same time
- Recheck mounting bolts after the first few trail runs
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU01012 |
| UPC | 814423019217 |
| Product line | Scorpion Performance Shock Absorber |
| Position | Rear |
| Shock type | Hydraulic, twin-tube |
| Lift height | Designed for a 3 in. lift |
| Finish | White |
| Bushings and boot | Black Daystar shock bushings and boot |
| Sold as | Individual shock |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and the 1997–2006 Jeep Wrangler (TJ) in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
The 2007–2018 Wrangler JK and the JL generation are outside this fit range. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Daystar tunes this shock for a 3 in. lift and for its Comfort Ride Lift and Leveling Kits, so confirm your suspension setup matches before installing.
What’s included
Black Daystar shock bushings and a boot are included. Each shock is sold individually.
Not included: Daystar part KJ09126BK, which Daystar says to use with this shock; it is a separate item.









