Overview
The TeraFlex 1970104 is a transfer case lowering kit with four steel spacers, each .5 inch thick, for Jeep Cherokee (XJ) models. It corrects pinion angle on 3 – 4.5 inch suspension lift kits and helps reduce drive shaft vibration caused by increased suspension lift. It fits the 1984-2001 Jeep Cherokee (XJ).
All spacers and hardware needed for installation are included. It fits XJ Cherokee models.
Key features
- Suited to correcting pinion angle on 3 – 4.5 inch suspension lift kits
- Four steel spacers, .5 inch thick
- Four Grade 5 bolts and four lock washers
- Installation instructions included
- Designed for XJ Cherokee models
Before you install
A transfer case lowering kit moves the transfer case down so the drive shaft angles stay workable after a suspension lift. When the case sits at its factory height on a lifted Cherokee, the front and rear driveline angles can become mismatched, which often appears as a vibration at speed. Spacers like these change the mounting height to bring those angles closer together so the shafts run more evenly.
Because the spacers change the transfer case position, the drive shafts, universal joints and output yokes are often checked or replaced at the same time. Look for worn or binding u-joints, play in the slip yoke, and vibration that changes with road speed. Recheck the bolts after the first few trail runs, since the new mounting height can allow the hardware to settle.
Before buying, match the kit to your suspension lift height and compare your vehicle’s year and trim with the fit. Measure the existing drive shaft angles on level ground so you can judge whether the change is needed.
- Vibration that changes with road speed
- Worn or binding u-joints
- Play in the slip yoke
- Bolts to recheck after the first trail runs
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1970104 |
| UPC | 843885025207 |
| Spacer material | Steel |
| Spacer thickness | .5 inch |
| Spacer quantity | Four |
| Hardware | Four Grade 5 bolts, four lock washers |
| Lift compatibility | 3 – 4.5 inch suspension lift kits |
Vehicle fitment
The manufacturer fitment list covers the 1984-2001 Jeep Cherokee (XJ) in Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.
Wrangler, Grand Cherokee and other Cherokee-family models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Follow the included installation instructions. Check driveline angles after installing the spacers on a lifted vehicle.
What’s included
Four steel spacers, each .5 inch thick, four Grade 5 bolts, four lock washers and installation instructions.








