Overview
The Pro Comp 55076 is a transfer case lowering kit from Pro Comp Suspension that drops the transfer case 1 inch. It is made for lifted vehicles with 2 to 4 inches of lift.
Lowering the transfer case brings driveline angles back toward tolerance on lifted vehicles. Check the kit against your lift height and driveline layout before ordering.
Key features
- 1 inch transfer case drop
- Intended for 2 to 4 inches of lift
- Restores driveline angles on lifted applications, per the manufacturer
Lift and driveline geometry
A lowered transfer case works as part of the driveline, along with the front and rear driveshafts and their u-joints. When a lift raises the body, the transfer case output moves out of line with the axles, and the angles at each joint change. Lowering the case brings those angles closer to a workable range, but it does not replace a driveshaft check. Look at the joints after installation for binding or unusual wear.
Other parts often get checked at the same time. Shorter or longer driveshafts, worn u-joints and control arm or track bar geometry can all affect how the drivetrain behaves on a lifted vehicle. Before you buy, measure your current lift height and note whether the vehicle already has a driveshaft or brake line extension. Re-check the driveshaft angles and fasteners after the first few drives, since settling can change them slightly.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 55076 |
| UPC | 614901112009 |
| Type | Transfer case lowering kit |
| Drop | 1 in |
| Lift range | For vehicles with 2 to 4 in of lift |
Vehicle fitment
Measure your current lift and check the driveline angles before ordering. The kit is meant for lifted vehicles only.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the driveshaft angles after installing the kit and confirm they fall within tolerance.
What’s included
The package is one transfer case lowering kit. Check the package contents against your installation before starting.










