Overview
The Daystar KJ01008BK is a black transfer case drop that lowers the transfer case by 1 inch, a modest amount used to ease driveline angles on a lifted vehicle. It is made from heavy-duty polyurethane and comes with a limited lifetime warranty. Confirm fit for your application before buying.
Raising a vehicle with a suspension kit tilts the transfer case and driveshafts, and that tilt can cause driveline vibration. Lowering the transfer case with a drop reduces the angle at each joint. This 1-inch model improves driveline angles on lifted vehicles and is identified by part number KJ01008BK.
Key features
- 1-inch drop height
- Heavy-duty polyurethane construction
- Black finish
- Improves driveline angles on lifted vehicles
- Limited lifetime warranty
Lifted vehicles and driveline angles
Lifting a vehicle raises the transfer case and the driveshafts, and the steeper joint angles can cause vibration once the vehicle is up to speed. Lowering the case reduces that angle, which is why a drop is often part of a lift plan. Its effect depends on the rest of the suspension.
Check transfer case clearance against the crossmember and skid plates after the drop goes in. Joint angles on each end of the driveshaft should be compared with the readings taken before installation. Small adjustments are easier to make with the vehicle on stands.
Driveshaft length can change slightly after a drop. Look for binding or clunking during tight turns, and recheck the joints after the first few weeks of driving.
Specifications
| Brand | Daystar |
|---|---|
| Part number | KJ01008BK |
| UPC | 814423014304 |
| Product type | Transfer case drop |
| Drop height | 1 inch |
| Material | Heavy-duty polyurethane |
| Finish | Black |
| Warranty | Limited lifetime |
Vehicle fitment
Confirm fit for your transfer case application before buying. Check the make, model, year and chassis code against your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan to measure driveline angles after the drop goes in, since the change alters the angle at both ends of the driveshaft. Use jack stands or a lift, never a jack alone, when working under the vehicle.
What’s included
Confirm the contents against the installation steps before you begin. Have all bolts and fasteners ready before starting the work.








