Overview
The TeraFlex Adjustable Front Track Bar, part number 1743022, is an adjustable track bar, also called a Panhard bar, designed to eliminate bump steer without drilling holes. It centers the front axle and lets you fine tune front suspension geometry. It requires a minimum 3-inch lift and will not work on stock vehicles.
The track bar bushing is designed to reduce the effects of front wheel shimmy and to improve durability and tunability.
Key features
- Adjustable length for fine tuning front suspension
- Eliminates bump steer without drilling holes
- Centers the front axle
- Bushing designed to reduce front wheel shimmy
- Designed to improve durability and tunability
- Requires a minimum 3-inch lift
Bump steer and track bar wear
A track bar keeps the front axle centered side to side as the suspension compresses and extends. When its mounting points or bushing wear, the axle can shift, which often shows up as wandering, a loose feel near center, or a tire that scrubs on one side. Checking the bushing and both ends for play is a good habit at every service interval, and a bushing that has lost its shape should be replaced rather than tightened.
Adjustable track bars often get installed alongside other steering and suspension parts that take extra load after a lift, such as a drag link, tie rod ends and control arm bushings. Replacing them at the same time keeps the front end from developing new play. After any length change, get a front alignment, because axle position and toe settings both move with the bar.
- Look for cracked or split bushings after off-road runs
- Check the bar ends for play by hand with the wheels on the ground
- Recheck hardware torque after the first few trail outings
- Replace worn bushings before adding more lift
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1743022 |
| UPC | 843885023050 |
| Product type | Adjustable front track bar |
| Lift requirement | Minimum 3-inch lift |
Vehicle fitment
It fits TJ, XJ and ZJ Jeeps, meaning the Wrangler TJ, Cherokee XJ and Grand Cherokee ZJ. Check year, model and trim against your vehicle before ordering.
If you run a Wrangler YJ, Wrangler JK or Grand Cherokee WJ, confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The track bar installs without drilling holes. Because it requires a minimum 3-inch lift, it is not suitable for stock-height vehicles. Have the front alignment checked after installation, since changing track bar length affects front axle position.
What’s included
Check the package contents against your installation before starting.






