Overview
The TeraFlex sway bar center link, part number 97512, is a replacement center link 7.5 inches long, sold individually. It is designed for 4 to 6 inches of lift and is threaded on both ends so the length can be fine-tuned. Its zinc plating resists rust and corrosion.
Key features
- Replacement center link, 7.5 inches long
- Threaded on both ends for fine length tuning
- Zinc plating resists rust and corrosion
- Designed for 4 to 6 inches of lift
Setting the link length
A center link positions the sway bar relative to the axle, so its length affects how the bar sits at ride height. Adjustable length links allow the installer to set that position to suit the suspension once the lift is in place. Set the length with the vehicle at ride height rather than hanging on the axle, so the bar is not preloaded.
Zinc plating helps protect the link from road salt and moisture, but scratches in the finish should be treated quickly with touch-up coating. Threads on both ends need to be checked for full engagement of the jam nuts after the length is set. Inspect the ends for wear and replace worn parts rather than adjusting around them.
- Measure both ends before tightening the jam nuts
- Use touch-up coating on scratches in the zinc finish
- Check thread engagement after each length change
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 97512 |
| UPC | 843885016885 |
| Length | 7.5 inches |
| Lift range | 4 to 6 inches |
| Finish | Zinc plated |
| Threads | Both ends |
| Sale | Sold individually |
Vehicle fitment
No vehicles are named, so the fit for this center link is not confirmed. The 4 to 6 inch lift range is the only application detail given.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The threaded ends allow fine tuning of the length, so set the link to your lift before final installation.
What’s included
The center link, sold individually.
Not included: Replacement link ends, part numbers 9751213 and 9751214, which are sold separately.








