Select your vehicle

Currie Currie Sway Bar Quick Disconnects – CE-9141

Currie

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front sway bar quick disconnects, sold in pairs
  • Easy-pull stainless steel lynch pins and fluted, greaseable Dura-Thane bushings
  • Fits 2004–2006 Jeep Wrangler LJ and 1997–2006 Jeep Wrangler TJ
  • Machined from 7/8″ solid steel, MIG welded

Description

Overview

The Currie CE-9141 is a pair of front sway bar quick disconnects for the 1997–2006 Jeep Wrangler (TJ) and 2004–2006 Jeep Wrangler (LJ). Pulling the lynch pins lets you swing the sway bar up and out of the way, which Currie says improves front suspension articulation for off-road driving and rock crawling.

The links are machined from 7/8 inch solid steel, MIG welded and bent to angles that give rod clearance. The type is adjustable, and the quick disconnects come in pairs.

Key features

  • Front quick disconnect for the sway bar
  • Easy-pull stainless steel lynch pins
  • Fluted, greaseable Dura-Thane bushings
  • Machined from 7/8″ solid steel and MIG welded
  • Bent to exacting angles for rod clearance
  • Designed for improved front articulation off-road

Maintaining quick disconnects

A quick disconnect lets the front sway bar be released from the links so the axle can move more freely off road. Because the bar is no longer fully connected in the disconnected position, that setup suits slow trail use, and the bar should be reconnected before highway driving. Check that the lynch pins seat fully every time you reconnect.

The bushings in the disconnects need regular attention. Grease them at service intervals, wipe grit from the pins before use, and inspect the stainless steel pins for bends or wear. Check the factory sway bar and its mounts for condition too, since the disconnect works with that bar rather than replacing it.

  • Grease the bushings at service intervals
  • Inspect lynch pins for bends or wear
  • Reconnect the bar before highway driving

Specifications

Brand Currie
Part number CE-9141
UPC 70000111551
Position Front
Fitment type Direct fit
Adjustability Adjustable
Material 7/8″ solid steel
Lynch pins Stainless steel, easy pull
Bushings Fluted, greaseable Dura-Thane
Quantity Sold in pairs

Vehicle fitment

The manufacturer fitment list covers the 2004–2006 Jeep Wrangler (LJ), Unlimited and Unlimited Rubicon, and the 1997–2006 Jeep Wrangler (TJ) with 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.

The list does not cover the Wrangler YJ, the JK or the JL generations. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Pull the stainless steel lynch pins to release the bar, then swing it up and out of the way. The disconnect is intended for off-road driving and rock crawling. Check local road-use rules before driving with the bar disconnected.

What’s included

Each pair includes the two quick disconnects with their stainless steel lynch pins and Dura-Thane bushings.

Not included: The factory sway bar itself is required and is not part of this product.

SKU: CURCE-9141 Category:

Specification

Shipping weight 3.00 lbs
Package dimensions 8.00 × 4.00 × 4.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (LJ)2004–2006Unlimited, Unlimited Rubicon
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Currie CE-9141 fit a Jeep Wrangler LJ?

Yes. The 2004–2006 Jeep Wrangler (LJ) is covered, including the Unlimited and Unlimited Rubicon trims. Confirm your trim before fitting, because fit depends on trim.

Does it also fit a Jeep Wrangler TJ?

Yes. The 1997–2006 Jeep Wrangler (TJ) fits with 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims. Wrangler YJ, JK and JL models are not covered.

Are these sold as a pair or as single units?

They are sold in pairs. Each set includes two front quick disconnects with stainless steel lynch pins and fluted, greaseable Dura-Thane bushings.

What material is used for the sway bar quick disconnects?

Currie describes them as machined from 7/8" solid steel, MIG welded and bent to exacting angles for rod clearance. The stainless steel lynch pins and Dura-Thane bushings are also part of the design.

Should the lynch pins be checked before each trip?

Yes. Confirm both pins are fully seated and free of bends before driving, because a pin that is not seated can let the bar move unexpectedly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon