Overview
The TeraFlex HD Tie Rod Kit, part number 4920287, is a heavy duty tie rod end set for the 1997–2006 Jeep Wrangler (TJ) and the 2004–2006 Wrangler (LJ). The one-ton joint end comes in a stock Jeep taper or a large one-ton taper, which is the standard Dana 60 size.
This version is the offset, large taper end with a left-hand thread. The stock taper ends fit TJ Dana 30 knuckle holes, while the large taper fits the larger 60-type knuckles used in the Tera CRD60 axle line.
Key features
- Heavy duty tie rod ends with a one-ton joint end
- Offset large taper end
- Left-hand (LH) thread
- Large taper fits 60-type knuckles such as the Tera CRD60 axle line
- Offset design for applications where differential interference may occur
Tie rod maintenance
Tie rods link the steering box or rack to the steering knuckles, so they carry steering loads on every turn. Joint wear shows up as looseness at the wheel, a wandering feel on the highway, or uneven tire wear on the inner edge. Off-road, the tie rod takes hits from rocks and ruts, so a quick look at the joint ends and boots after each trip is worth the time.
A heavy duty kit is often installed alongside other steering and axle work, such as a track bar or drag link refresh. Matching joint sizes and thread direction across the setup avoids binding. Check the threads on both ends, and confirm the tie rod length before fully tightening the jam nuts.
- Inspect the joint ends and boots at regular service intervals
- Re-torque clamp bolts after the first trail runs
- Get an alignment after any change in tie rod length
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4920287 |
| UPC | 843885032922 |
| Part type | Heavy duty tie rod kit |
| Joint | One-ton joint end |
| Taper | Large one-ton taper (standard Dana 60) |
| Style | Offset |
| Thread | Left-hand (LH) |
| Fit style | Direct fit |
Vehicle fitment
It fits the 1997–2006 Jeep Wrangler (TJ) and the 2004–2006 Jeep Wrangler (LJ), including Unlimited versions.
The YJ and JK Wranglers are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The large taper in this kit fits 60-type knuckles, so it does not suit the stock TJ Dana 30 knuckle holes; TeraFlex offers a stock-taper version for those.









