Overview
The Moog ES3417T is a passenger side front outer tie rod end, or front right outer tie rod end, for the 2000–2005 Ford Excursion and for Ford F-250 and F-350 Super Duty trucks through 2007. It is sold individually.
Moog calls tie rods a crucial part of steering: turning the wheel moves the rack, the rack moves the tie rods, and the tie rods move the steering arm or spindle. The ES3417T uses Moog’s forged one-piece construction in place of a two-piece original, adds a neoprene-sealed rubber dust boot that resists temperature extremes and abrasion, and relies on hardened full-ball studs that Moog says outlast the original ones.
The ES3417T covers the right front outer position, and the same part fits the Excursion and the Super Duty pickups. It fits Eddie Bauer, Limited, XLS and XLT Excursions, as well as Lariat, XL, XLT, King Ranch and Harley-Davidson Edition trucks. The hardened studs and one-piece forged body are part of the design.
Key features
- Passenger side, front right outer
- Sold individually
- Forged one-piece unit
- Neoprene-sealed rubber dust boot
- Boot valve for flushing old grease
- Hardened full-ball metal studs
Right side tie rod work
Right side outer tie rods take steady load from the steering box and from road shock, so wear tends to show on that side first on many trucks. Note any tendency to drift to one side during highway driving, since a worn right outer end can contribute to it.
Super Duty trucks often carry heavier trailers and bigger tires, which increases the force passing through the steering linkage. If you tow or fit larger tires, inspect the tie rod ends, drag link and pitman arm at each service. A tire size change is a good moment to recheck the whole steering system.
Work on one side at a time with the vehicle on stands, and keep the boot clean when fitting the new end. Once both sides are done, reset the alignment so the tires wear evenly on the road.
- Inspect the drag link and pitman arm
- Recheck steering after a tire size change
- Work on one side at a time
Specifications
| Brand | Moog |
|---|---|
| Part number | ES3417T |
| Product | Front outer tie rod end |
| Side | Passenger side (front right) |
| Quantity | Sold individually |
| Construction | Forged one-piece unit |
| Dust boot | Neoprene-sealed rubber |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2000–2005 Ford Excursion, the 1999 Ford F-250, and the 1999–2007 Ford F-250 Super Duty and Ford F-350 Super Duty.
It covers the right side only, through 2007, so the left side tie rod end and later Super Duty trucks are not covered. The Excursion runs from 2000 to 2005, and the 1999 F-250 is separate from the Super Duty range. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Moog says to align the vehicle immediately after replacing tie rods. This is the right-hand part, so the left side needs a different one. The boot has a small valve so old grease and contaminants can be flushed out.










