Overview
The TeraFlex 1415500 is a front lower Alpine Series FlexArm for 2007–2016 Jeep Wrangler (JK) 2-door and 4-door models. The Alpine line sits between TeraFlex’s sport and monster flexarms. It keeps the maintenance free feel of the sport arms while offering full adjustability, so caster and pinion angle can be corrected to suit the lift. An adjustable joint sets the arm length, and an aluminum pinch collar locks it once the correct length is found.
Each arm uses a 1-5/8 inch X 0.156 wall DOM tube with forged threaded joints and a black UV protected powder coat over a premium black e-dipped coating for corrosion resistance. Factory style bushings at both ends damp vibration for daily ride quality. The arms allow full range of movement with strong articulation off-road, and they center the tires in the wheel wells while increasing wheel base.
Key features
- Full adjustability for caster and pinion angle correction
- Centers tires in the wheel wells and increases wheel base.
- No-maintenance joints for smooth, quiet flex
- Forged threaded joints
- Aluminum pinch collar locks the adjustable joint once length is set
- Factory style bushings at both ends for vibration damping
- Black UV protected powder coat over premium black e-dipped coating
- Lifetime warranty against defects.
Setting length and checking alignment
Adjustable flexarms are most useful when the length is set with the vehicle sitting at its real ride height, including the tires and the lift you run. Changing caster or pinion angle moves the axle, so take small steps and recheck the measurements after each change. Once the joint is locked, drive the vehicle on the highway and listen for vibration, which often points to a pinion angle that needs more attention.
Over time the bushings and threaded joints deserve a look. Inspect the pinch collar for movement, look for cracked rubber at the bushings, and check that the joint threads are free of rust before each season of heavy use. Arms that have been moved often may need a new alignment check, and uneven tire wear on the front axle is a common sign the setup needs attention.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1415500 |
| UPC | 843885034162 |
| Position | Front lower |
| Series | Alpine |
| Tubing | 1-5/8 inch X 0.156 wall DOM |
| Joints | Forged threaded, with aluminum pinch collar |
| Bushings | Factory style, both ends |
| Finish | Black UV protected powder coat and premium black e-dipped coating |
| Warranty | Lifetime against defects |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2007–2016 Jeep Wrangler JK models in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, in both two-door and Unlimited form. Confirm fit for your vehicle’s year, model and trim before ordering.
The list does not include the later Wrangler JL, the earlier TJ or LJ, or the Gladiator.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because adjustment changes caster and pinion angle, set the length with the vehicle at the lift height you run, then check the front alignment after the pinch collar locks the joint. Use the collar only after the correct length has been determined.
What’s included
Check the package contents, including the number of arms and any hardware, against your installation before starting.









