Overview
The FOX883-26-074 is a rear Performance Elite 2.5 piggyback adjustable shock. It fits the 2020 to 2026 Jeep Gladiator in 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport models.
The Performance Elite 2.5 is built for drivers who want more off-road capability. External compression adjusters let you adapt quickly to terrain and vehicle load by turning a knob.
Race-developed high-flow pistons and vehicle-specific valving support off-road performance and on-road balance. The shock has more aggressive tuning, larger components and increased fluid capacity.
The shock has a piggyback reservoir, a 2.5 inch body diameter, eyelet top and bottom mounts and a gas charge. Lift options run from stock to +6 inches of lift height.
Key features
- External compression adjusters
- Piggyback reservoir design
- Race-developed high-flow pistons
- Vehicle-specific valving
- 2.5 inch body diameter with eyelet mounts
- Lift options from stock to +6 inches
Setting compression for terrain and load
External compression adjusters let you change how firmly the shock resists compression, which affects how the front end settles on bumps and how the rear handles weight. A softer setting suits smooth gravel or highway driving, while a firmer setting helps control a loaded vehicle or fast desert runs. Make one change at a time and test the vehicle over the same stretch of road.
A piggyback reservoir gives the shock more room for oil and gas, which helps it stay consistent during long off-road use. Check the mounts, eyelets and bushings for wear whenever the shock is replaced, and inspect the reservoir for dents after rocky trails. Lift height changes how the shock is loaded, so match the adjustment to the height you run.
Specifications
| Brand | FOX |
|---|---|
| Part number | FOX883-26-074 |
| Series | 2.5 Piggyback Reservoir (Performance Elite 2.5) |
| Position | Rear |
| Shock type | Piggyback |
| Body diameter | 2.5 inches |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Charge | Gas charged |
| Adjustment | External compression adjusters |
| Lift options | Stock to +6 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020 to 2026 Jeep Gladiator in 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport models. Confirm your year, model and trim before ordering.
The list covers Gladiator models from 2020 to 2026 only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the compression adjusters to suit your terrain and load, and check the eyelet mounts against the original rear shock before fitting. Work on a securely supported vehicle.
What’s included
One rear piggyback shock.













