Overview
The TeraFlex Complete Adjustable FlexArm Kit, part number 1415610, is a set of eight Alpine Series control arms for the front and rear lower positions. Flexarms set pinion and caster angles and center the axle, so a full set suits a builder replacing every lower arm at once.
Alpine construction uses factory-style rubber bushings at both ends, forged threaded joints, and an aluminum pinch collar that locks each adjustable joint. The set carries a black e-dipped finish under a black powder coat and is listed with a lifetime warranty against defects.
Key features
- Set of eight control arms in one kit
- Full adjustability for caster and pinion angle correction
- Centers tires in the wheel wells and increases wheelbase
- No-maintenance joints for smooth, quiet flex
- Black UV protected powder coat over e-dipped coating
Planning a full arm set
Replacing every lower arm at once gives a consistent setup, but it also means each arm must be set to a planned length before the joints are locked. Lay out the arms by position and keep the left and right pieces separate so nothing gets mixed up during install.
A full set often changes the axle location more than a single arm would, so the steering and driveline may need a fresh check. Track bar length, brake hose routing and clearance to the skid plates are worth reviewing before the vehicle is driven.
Check each joint for free movement after the pinch collar is tightened, and recheck the set after the first few weeks of driving. Settling in new bushings can shift small angles that were correct at installation.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1415610 |
| UPC | 843885034056 |
| Product line | Alpine Series FlexArm kit |
| Quantity | Set of 8 control arms |
| Position | Front and rear lower |
| Tube | 1-5/8 inch x 0.156 inch wall, DOM |
| Joints | Forged threaded |
| Warranty | Lifetime against defects |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm fit for your vehicle’s body style, year, model and trim before ordering.
Installation notes
Because the set includes eight arms across the front and rear lower positions, check alignment and joint fit after each arm is set. Install every arm at the length planned for your pinion and caster angles before locking the joints.
What’s included
A set of eight Alpine Series control arms.









